32 Inch LCD Amber Standby light.. goes green with power, times out after 30 sec. and flashes. No screen, no audio. 24, 15, 12 and 5 voltages are there on the supply. (however one thing..they are all there during standby. Thought that was strange.) Caps look good. Nothing wrong with supply.
Further testing showed no BL voltage, should be over 3 volts according to BudM.
Digging deeper and what a pain this backwards built tv is to work on, I find serious damage on the tuner/logic/main (I never know what to call this one)
Looks like someone plugged or unplugged a hdmi cable while set was on.
Not good as you can see from even my poor picture.
This of course is way above my skills to try to get this board going. So my question is what is the chance of damage being contained just on this board?
This is a 32 inch and older so might gamble 30.00 board on it but no more.
Thanks for looking.
Further testing showed no BL voltage, should be over 3 volts according to BudM.
Digging deeper and what a pain this backwards built tv is to work on, I find serious damage on the tuner/logic/main (I never know what to call this one)
Looks like someone plugged or unplugged a hdmi cable while set was on.
Not good as you can see from even my poor picture.
This of course is way above my skills to try to get this board going. So my question is what is the chance of damage being contained just on this board?
This is a 32 inch and older so might gamble 30.00 board on it but no more.
Thanks for looking.
Attached Files
Comment