Re My pioneer pro elite plasma 1010hd.
I was wondering about my Pioneer pro elite1010hd it seems that it shuts off on its own. When I try to turn it on it starts blinking the red light seven times. I then turn off all power and then back on and it still blinks seven times. I let it sit overnight just in case its a temperature problem. In the morning I tried it again and it clicked on but went back to blinking I turned it off and back on and tapped the back and it came on. Almost like out was a loose wire. Out stayed on for eight hours and it shut down again. I tried to turn it on again but out only blinked the seven red lights over and over again. I left it for the night and woke up and tried to turn it on and it was still blinking once again I tapped the back on the top and it came on. So I took the back off and secured the trap switch and turned it on. What is weird is the two fans when I turned the tv on spun maybe halfway then stopped but the tv is still on. Are they ran by a temperature guage or are they supposed to stay running until the tv is turned off? Because I have been running it since 2 pm without the back on and they didn't start yet and it didn't shut off yet. Maybe if the fans aren't working with The back on out gets too hot and shuts down but after sitting off all night it still went to blinking when I tried it in the morning that's when I tapped it again and it came on. Confused😒