Samsung pn43d450a no video help

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • crdz66
    Badcaps Veteran
    • Nov 2012
    • 242
    • USA
    #1

    Samsung pn43d450a no video help

    Hello friends.

    I'm looking for some kind advice.
    I get second hand a samsung plasma pn43d450a with no power on problem. He said one day quit working playing video game.

    After check power supply voltage, i find a short on y sustain board. Igbt transistor become bad.
    So, i bought new sustain board and now the tv is working but no video or backlight activity.

    The control board is blink 1 per sec.
    The test pattern is not working.
    The sound, i don't know if is working because this guy can't remember what was last input he used (composite,coaxial,hdmi).
    The normal startup sound from samsung tv is working.

    Main board????
    The main board need produce the backlight too.

    Thanks for you opinions and advice
    Tags: None
    • Hamie
      Badcaps Legend
      • Apr 2014
      • 1383
      • UK
      #2
      Re: Samsung pn43d450a no video help

      Check the buffer for shorts.

        Comment

        • crdz66
          Badcaps Veteran
          • Nov 2012
          • 242
          • USA
          #3
          Re: Samsung pn43d450a no video help

          I check the buffer already too.
          No shorts.

          Set the negative probe on ground and the positive was sliding along the connectors.

            Comment

            • Hamie
              Badcaps Legend
              • Apr 2014
              • 1383
              • UK
              #4
              Re: Samsung pn43d450a no video help

              Are the VSC and ve voltages staying up or falling?

                Comment

                • crdz66
                  Badcaps Veteran
                  • Nov 2012
                  • 242
                  • USA
                  #5
                  Re: Samsung pn43d450a no video help

                  Staying

                    Comment

                    • crdz66
                      Badcaps Veteran
                      • Nov 2012
                      • 242
                      • USA
                      #6
                      Re: Samsung pn43d450a no video help

                      If the test patterns no work means do i have a chance panel is defective???

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • m1ch43lzm
                          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                          by m1ch43lzm
                          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                          05-12-2025, 08:37 PM
                        • repair-it
                          Need advice testing a samsung power supply board with scope
                          by repair-it
                          I am attempting to test a samsung power supply board to verify the pfc ic is working. I am powering up the board with my isolation transformer. The board turns on fine but when I attempt to connect the ground for the scope probe, it trips out the isolator. I was taught not to 'float my scope' so I am wondering if I should test without connecting the ground lead or would that be asking for trouble? Not sure how else to test, I don't have a portable scope. I could plug direct to mains power but that would bypass the safety factor.
                          07-12-2025, 11:00 AM
                        • Hakuu
                          LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                          by Hakuu
                          Hi There,

                          This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                          After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                          More Details

                          TV Model - LG OLED77G1PUA

                          Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                          07-12-2023, 02:37 PM
                        • ohren
                          Upgrading a Samsung ue55nu7096u with logic board from an ue55ru7105k -- good idea?
                          by ohren
                          I hope this is the right forum to post in despite not technically being a repair, but still a question of swapping boards.

                          I thought I'd explore the possibility to upgrade an existing working Samsung ue55nu7096u with the logic board (and power board if needed) of a newer model (ue55ru7105k) of the same size and appearance (and resolution). The reason being I'd like the extra inputs of that board including component in, an extra HDMI port and bluetooth. Its panel is broken so I have no use for the board otherwise.

                          The models launched in 2018 and 2019 respectively....
                          09-08-2023, 05:24 PM
                        • C152Heavy
                          Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board
                          by C152Heavy
                          Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board

                          Summary for TL-DR readers:
                          • Backlight is intermittent, may come on with TV boot or not. No flickering, never fails during TV on.
                          • Have obtained Samsung schematic & service documents - Can upload if helpful.
                          • Have read ALL applicable threads
                          • C1818 and CP820 replaced as low hanging fruit
                          • CN802 data taken for normal and failed BL operation. SUMMARY: Pin 2 - 5vDet = 3.52 @normal, 0.0 @BL fail. Pin 6 - EPWM = 1.631 @normal, 1.058 @BL fail.
                          • VCC pin (18) of PFC...
                          01-11-2023, 02:53 PM
                        • Loading...
                        • No more items.
                        Working...