Announcement

Collapse
No announcement yet.

Vizio vp50hdtv10a problems

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Vizio vp50hdtv10a problems

    Ok, checked and replaced all caps. this thing is giving me fits here is my readings

    P800:Orange 5Vsb 5.00V
    CN805: Bottom pins0.00V
    CN807 0.0V, 0.0V, 0.0V
    CN802: 0V
    CN803: 0V
    CN809: 0V
    I made a video instead of pics...help please
    http://youtu.be/1p1ifT_cD50

    #2
    Re: Vizio vp50hdtv10a problems

    Probably failed Epprom as you get no Pson signal.
    Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

    https://www.facebook.com/Telford-Tel...7894576335359/

    Comment


      #3
      Re: Vizio vp50hdtv10a problems

      so how do i test for this

      Comment


        #4
        Re: Vizio vp50hdtv10a problems

        Is the pcb connectors labeled with voltages ?
        Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

        https://www.facebook.com/Telford-Tel...7894576335359/

        Comment


          #5
          Re: Vizio vp50hdtv10a problems

          Yes they are

          Comment


            #6
            Re: Vizio vp50hdtv10a problems

            https://www.badcaps.net/forum/showth...io+vp50hdtv10a
            these links are too toms manuals you maybe able to use for fault finding the link in post 4 in above link does not work so use the top one in this list as tom says lg panels are the same in that thread.
            http://www.toms-service-manuals.com/...h=Submit+Query
            Last edited by vinceroger69; 11-01-2015, 06:01 PM.

            Comment


              #7
              Re: Vizio vp50hdtv10a problems

              Ok that didn't help, just trying to fix this damn thing before I throw it out the door

              Comment


                #8
                Re: Vizio vp50hdtv10a problems

                Ok with some doing more looking and testing, I found something interesting if I take and jumper AC detect to RL-ON board powers up and doesn't shut down with c800 disconnected. No vs or va voltage . Any suggestions

                Comment


                  #9
                  Re: Vizio vp50hdtv10a problems

                  Anybody help me

                  Comment


                    #10
                    Re: Vizio vp50hdtv10a problems

                    I'll take a stab and it could be in protection if either the ysus or Zsus boards have failed. the logic control board controls the power up sequence, also detects if there's a problem with the z or y boards I believe or it could itself be dead but IPM failure is a fairly common fault.

                    Don't have enough LG knowledge to say more.

                    Maybe describe what it is doing from when it's plugged in to when you attempt to wake it out of standby. I know on an old 2006/7 50PX5 it would attempt to switch on , led would go green then shut off straight bad to red led on a shorted sus board.
                    Last edited by tw2005; 11-13-2015, 08:31 PM.

                    Comment

                    Working...
                    X