3/4 of picture missing on TC-P50G10

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • isaac2264
    New Member
    • Aug 2015
    • 3
    • india
    #1

    3/4 of picture missing on TC-P50G10

    Hi everyone!

    My Panasonic plasma is over 6 years old and it finally is having some problems.

    Everything works like normal except the picture is mostly missing. If anyone can help I would greatly appreciate it!

    I attached a photo of the screen.
    Attached Files
    Tags: None
    • Hamie
      Badcaps Legend
      • Apr 2014
      • 1383
      • UK
      #2
      Re: 3/4 of picture missing on TC-P50G10

      Probably a buffer board failure.

        Comment

        • Andrew F. Ali
          Badcaps Legend
          • Jan 2014
          • 2450
          • Trinidad & Tobago
          #3
          Re: 3/4 of picture missing on TC-P50G10

          Is that the screen picture upside down or was the camera shot upside down? Anyway, I would check SU, SD, SS2, C1 or C2 boards.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • maneatingmonkey
              Missing LCD Panel Voltages VGH, VGL, VCOM (TCL 55P6US Sound & Backlight but NO Picture)
              by maneatingmonkey
              I have a TCL 55P6US with sound and backlight but no picture. This model does not have a T-CON board, and the right (rear perspective) panel board is fed from the left panel board. I have not been able to induce any change by disconnecting the secondary panel board or the tape cut-off method on the primary board.

              There are a bunch of voltages missing on the panel boards. I can't find any shorted caps of the panel boards, and all of the missing voltage rails read in the kiloohms, which leads me to suspect the issue may lie on the circuit board, rather than a short in the panel.
              ...
              L Panel #1
              11 Photos
              03-27-2024, 07:17 AM
            • garrymc123
              Luxor TV board input board change but picture upside down
              by garrymc123
              Looking for some advice changed over the video input board due to bad hdmi ports but now the picture is upside down tried the service menu but can't find anything to do with flip the picture..

              Is there anything I can do to flip the picture or do I need to change the board again..

              Thanks
              Garry...
              08-29-2022, 04:53 AM
            • Tr0ll
              T-con suspect issue. Both ribbon cables no picture. One ribbon cable ok. (58pus8545)
              by Tr0ll
              Hi guys! I realized you have a lot of knowledge here so i am hoping you could point me in right direction with my odd issue.

              The Tv is a Philips 58PUS8545/12, it had no picture but working backlights.

              Original T-con:
              Opened the Tv and tested to unplug one ribbon cable at a time. With this test i could see that i got fine picture on both halves as long as there was only one ribbon cable connected, with two connected picture were gone.

              First replacement T-con:

              I thought it might be t-con and ordered new t-con from china(supposedly tested)...
              10-07-2023, 07:48 PM
            • JJAAMM
              SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
              by JJAAMM
              This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

              Problem
              TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
              07-06-2023, 06:01 AM
            • TR103
              Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
              by TR103
              Hi, I have a Samsung UE50TU with:
              - sound and backlight, but no picture
              - when it arrived, it had a picture for a few seconds
              - it keeps rebooting
              - without ribbon cable between the two panel boards, it does not reboot but I have no picture
              - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
              - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

              - without cable between mainboard and lcd panel and with a jumpered...
              01-22-2025, 04:12 PM
            • Loading...
            • No more items.
            Working...