samsung t260 hd no power no led power lights

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • feer
    Member
    • Jul 2015
    • 10
    • usa
    #1

    samsung t260 hd no power no led power lights

    hi to allguys i got a samsung t260 hd yesterday power on like few second flicker screen black then go off no more, power or led light on power button dissemble the monitor then remove the inverter tm-0918 i know the The secondary resistance is about 940 ohm between S1 and S2 (or S3 and S4). The primary resistance is about 0.3 ohm between P1 and P2.

    mine are secondary resistance is about 1032 ohm between S1 and S2 (or S3 and S4).
    and The primary resistance is about 0.3 ohm between P1 and P2. mines in P1 and P2 are primary resistance is about 0.9 ohm ? any insights on this would be a bad invert er any help greatly appreciated thanks fernando...
    Last edited by feer; 07-08-2015, 05:38 PM.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • GLISIT
      Asus Probook P5440UF-XB74 power issue
      by GLISIT
      Hi all,

      TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


      I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

      A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
      01-16-2025, 02:29 PM
    • mrtek
      Samsung UN43NU6950FXZA No power
      by mrtek
      Hi

      Picked up another TV. Samsung UN43NU6950FXZA. No power and no standBy led on. Removed back cover and:
      Main fuse = OK
      Back light LED = OK. Power them with aux power source
      LED output = OK 156V
      I do get 12 V DC out of the power supply going to the digital section but no 5V or 3.3V. PS_on voltage is only 1.8V. I have looked everywhere on the PCB , I could not find i reference for 5V output.
      Also removed connections to panel, speakers and remote but no luck. One strange thing is that even with the LED power supply working, backlight LED do not turn on...
      07-20-2025, 08:06 PM
    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      ORIGINAL POWER SUPPLY BOARD
      7 Photos
      11-22-2024, 01:46 PM
    • TKF
      Samsung BN44-00775A no Power No STB or Power lights.Help needed
      by TKF
      After a lot or reading and searching I suspected PB Power Board#BN44-00775A but after voltage tests I'm not sure what they indicate or point to.
      1st I unplugged MB and left only BLs plugged in to see if I got light No BLs come on. So I suspected Black lights but then tested BLs with BL tester they came on. I suspect a short somewhere I started testing at the STB pin 8v/on13v I get 12.80v note no stb lights on
      I noticed with only MB plugged in MB showed signs on life saw red light on not sure from where and it started warming up.
      Thanks for any help or ideas or testing suggestions...
      06-26-2023, 11:05 AM
    • Journey11
      Samsung TV won't turn on ... keeps cycling the power relay on & off
      by Journey11
      Hi All,
      First time posting here ... my name is Kevin but my friends call me Journey.
      I have a Samsung 75" LCD model UN75RU8000FXZA that I don't remember the original fault other than it wouldn't power up anymore.
      After it sat for many month's I decide to look at it again. The motherboard seemed to have power regulation issues. After much fussing I decided to just get a new MB.
      It came a few days ago and I installed it now just cycles the power relay on and off ... when on the backlights light up and then dim and then relay kicks off and the whole things starts again....
      07-04-2024, 02:44 PM
    • Loading...
    • No more items.
    Working...