Samsung 47UN5300d/F7

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jwells1964
    New Member
    • Jun 2015
    • 3
    • United States

    #1

    Samsung 47UN5300d/F7

    Unit was fine then the other day no video, no menu but backlight is there, I know it is the video board but can itbefixwd
  • budm
    Badcaps Legend
    • Feb 2010
    • 40746
    • USA

    #2
    Re: Samsung 47UN5300d/F7

    How about the pictures of the back side of the TV so we can see how all the board are connected together.
    Can you also verify the make and the model number? Samsung 47UN5300d nothing comes up.
    Did you check the DCV at both end of the SMD fuse on the T-CON board with ref to GND?
    Last edited by budm; 06-25-2015, 11:23 PM.
    Never stop learning
    Basic LCD TV and Monitor troubleshooting guides.
    http://www.badcaps.net/forum/showthr...956#post305956

    Voltage Regulator (LDO) testing:
    http://www.badcaps.net/forum/showthr...999#post300999

    Inverter testing using old CFL:
    http://www.badcaps.net/forum/showthr...er+testing+cfl

    Tear down pictures : Hit the ">" Show Albums and stories" on the left side
    http://s807.photobucket.com/user/budm/library/

    TV Factory reset codes listing:
    http://www.badcaps.net/forum/showthread.php?t=24809

    Comment

    • cashkennedy
      Badcaps Veteran
      • Aug 2011
      • 668
      • USA

      #3
      Re: Samsung 47UN5300d/F7

      That model number doesn't yield any search results. Are you sure that's the correct model number?


      this is the only elektrotanya manual result for a Samsung 5300
      Fixed so far 12 lcd's , 1 plasmas, 5 monitors, 0 dlp's (plan to keep the dlps at 0). and 3 atx power supplies, and 2 motherboards.

      Comment

      • mmartell
        Badcaps Legend
        • Oct 2013
        • 3189
        • Canada

        #4
        Re: Samsung 47UN5300d/F7

        For starters it's likely a 46" not 47".

        Comment

        • jwells1964
          New Member
          • Jun 2015
          • 3
          • United States

          #5
          Re: Samsung 47UN5300d/F7

          my apologies, I received 2 TV's and got them mixed up, the model of the one in question is a Samsung UN32EH5300FXZA WITH THE VERSION NO: UU02, has power backlight and remote functions but no video and no menu, it has a power supply module, a video (Digital PCB) and a buffer scan pcb for the panel, I heard something about reloading the EEprom to bring them back but I like to be patient in case someone has seen this before, thanks and sorry for the error

          Comment

          • mmartell
            Badcaps Legend
            • Oct 2013
            • 3189
            • Canada

            #6
            Re: Samsung 47UN5300d/F7

            Picture of the board layout with the back off ? If there is a tcon board present I would check the fuse.

            Comment

            • cashkennedy
              Badcaps Veteran
              • Aug 2011
              • 668
              • USA

              #7
              Re: Samsung 47UN5300d/F7

              Have you checked if the tiny fuse(s) on the tcon (buffer scan pcb for the panel as you called it) are open?

              Have you checked all the voltages leaving the power supply to make sure theyre within spec?

              Please post pictures of the mainboard and tcon.

              The manual I linked earlier does apply


              You should probably start with the troubleshooting section and follow all their steps to discern whether the problem is the tcon or the mainboard.
              Last edited by cashkennedy; 06-26-2015, 03:26 AM.
              Fixed so far 12 lcd's , 1 plasmas, 5 monitors, 0 dlp's (plan to keep the dlps at 0). and 3 atx power supplies, and 2 motherboards.

              Comment

              Related Topics

              Collapse

              • m1ch43lzm
                HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
                by m1ch43lzm
                Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
                Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
                05-12-2025, 08:37 PM
              • Hakuu
                LG OLED77G1PUA - No Video / Audio after a TCON Board change and Software Update
                by Hakuu
                Hi There,

                This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.

                After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.

                More Details

                TV Model - LG OLED77G1PUA

                Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt...
                07-12-2023, 02:37 PM
              • ohren
                Upgrading a Samsung ue55nu7096u with logic board from an ue55ru7105k -- good idea?
                by ohren
                I hope this is the right forum to post in despite not technically being a repair, but still a question of swapping boards.

                I thought I'd explore the possibility to upgrade an existing working Samsung ue55nu7096u with the logic board (and power board if needed) of a newer model (ue55ru7105k) of the same size and appearance (and resolution). The reason being I'd like the extra inputs of that board including component in, an extra HDMI port and bluetooth. Its panel is broken so I have no use for the board otherwise.

                The models launched in 2018 and 2019 respectively....
                09-08-2023, 05:24 PM
              • ygorsan
                LG 55NANO77SRA TV – Menu scrolling by itself even after removing button board (Main Board EBU66792103)
                by ygorsan
                Hi everyone,




                I’m looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).







                🧩 Problem Summary:
                • The TV keeps scrolling through the menu or selecting items by itself.
                • I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
                • The remote control is not in use (batteries removed), and the TV still shows the same behavior.
                • I
                ...
                07-28-2025, 08:34 AM
              • Document Archive
                LCD LED TV Service Menu Codes
                by Document Archive
                ALL LCD LED TV SERVICE MENU CODES

                Service Menu Code with Board Name

                China Universal Board / Jumper Board Service Menu Code
                Changhong Ruba Service Menu Code
                Ecostar LED TV Service Menu Code
                Orient LED TV Service Menu Code
                Haier LED TV Service Menu Code
                TCL LED TV Service Menu Code
                Samsung LED TV Service Menu Code
                LG LED TV Service Menu Code
                Videocon LED TV Service Menu Code
                Supra LED TV Service Menu Code
                Toshiba LED TV Service Menu Code
                Symphony LED TV Service Menu Code
                Veste/ LED TV Service Menu Code...
                10-31-2024, 03:58 AM
              • Loading...
              • No more items.
              Working...