Earliest Led Tv Backlight Failure Yet Please Read.

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • kc8adu
    Super Moderator
    • Nov 2003
    • 8832
    • U.S.A!
    #21
    Re: Earliest Led Tv Backlight Failure Yet Please Read.

    did you put the diffuser and polariser sheets back in in the exact order and orientation they came out?
    that can cause odd symptoms.

      Comment

      • ReeceyBurger123
        Never Give Up !
        • May 2014
        • 7325
        • Britain
        #22
        Re: Earliest Led Tv Backlight Failure Yet Please Read.

        Originally posted by kc8adu
        did you put the diffuser and polariser sheets back in in the exact order and orientation they came out?
        that can cause odd symptoms.
        I did yes, I think that its because of the horrible contrast ratio and colours on the set that make it look washed out. I will get the owner to have a look before I send it back.
        Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

        https://www.facebook.com/Telford-Tel...7894576335359/

          Comment

          Previous 1 2 template Next

          Related Topics

          Collapse
          • edugimeno
            About replacing individual LEDS on BL strips
            by edugimeno
            Hi There!
            Having fixed 5-6 TV sets by replacing full LED strips, and having watched other people fix that by replacing just one LED in the strip, my question now is what should I consider before doing so.

            At this time I have some old strips removed from TV's with all but one LED working. Are there different voltage/current LED on different strips? Are 99% of them just the same and interchangeable?

            How do you find which specific model is needed for each strip? When I check if a LED is OK by attaching the multimeter leads to the individual led pads on the strips I...
            11-07-2022, 11:12 AM
          • Kingfreddie
            LED problem on samsung UE55F6475, 2 strips work. The rest is flashing every second.
            by Kingfreddie
            Ok.. this is the story:
            Have an old Samsung LED 3D TV (UE55F6475). First it started to lose light on the lower 40% of the screen now and then. Like for 10-60 mins and then it would work again. Then a bit later it just got stuck in that position. The lower 40% of the screen is dark, and it gets progressively darker the lower u go so it's obviously that LED strips where not working. I also looked for similar errors online and saw an exact copy and on that one it was faulty LED strips.

            This is kinda how it looked, just that mine were at the bottom of the screen:

            ...
            09-11-2021, 01:57 AM
          • howardc64
            Vizio E55-F1 dark backlight zones. LED failure or Dimming Zone Driver?
            by howardc64
            Problem

            Fixing a dimming zone TV with LEDs not lighting up. Dimming zone circuit introduces added variable to diagnose LED and/or Dimming Zone Driver board? Some 1/2 rows of LEDs appears to be out in active dimming zone off AND some brightness flickering with active dimming zone high while playing changing video



            Model & Board Pics



            Conflicting Spec

            Vizio indicate this TV has 10 dimming zones. However, LED strips and Zoned light driver connector suggest 12

            https://www.shopjimmy.com/vizio-gj-2k1...
            10-10-2024, 01:16 PM
          • Pipolups
            Corsair K70 LUX RGB dying LEDs
            by Pipolups
            Hi there !

            I'm having an issue for several weeks with my quite old K70 LUX RGB keyboard. I haven't used it for few months, and once I setup up again my desktop computer, I got several dead LEDs on that keyboard. I tried the Corsair troubleshooting thing (disabling options in iCUE, ...) but nothing changed so I conclude that for some reason some LEDs went in retirement...😅
            Decision taken to change these LEDs as I have access to desoldering iron and binocular magnifier, I wrote a ticket to tech support, hopping to obtain the LEDs reference and... They refused to tell me 🙄...
            10-08-2024, 11:58 AM
          • nick4275
            Vestel Based JVC no picture, leds on
            by nick4275
            Hoping someone has troden this path before !
            I'm looking at a JVC LT-39c790 - a vestel based unit.
            So, the remote turns it on, led's light up but no picture at all.

            I have a spare mainboard, so I know its not that. The PSU seems ok too.
            On the AUO T-Con I've got 16v on HAVDD_H but nothing on HAVDD_L - which I'm assuming should also be 16v ?

            So, Ive resorted to testing eveything I can on the board as I can't find any schemas for it (AUO 39T15 C04 Ctrl Bd) and I think I've found a diode gone short. it marked D005 on the board and E1 on the package...
            11-21-2023, 04:43 AM
          • Loading...
          • No more items.
          Working...