Toshiba 46XF356 T-conn problem

[newtothis]

Re: Toshiba 46XF356 T-conn problem

I will not subject the board to any more of my amateur fiddling. If I had been told immediately that the ribbon has no connector plug, that the top side is in fact a flap to lift, and that the removal is a delicate operation, I might have handled it better. As it stands now, a professional repair shop is the next stop.

OR... you may not of been so hasty and waited til it was posted? I answered your question regarding the connector the same day you posted the picture of the said connector. Bit if a shitty attitude you have in that post TBH.

Your set is scrap from when you first came here so it made no difference at all anyway.

[Bisjer]

Re: Toshiba 46XF356 T-conn problem

Why so touchy, newtothis? I have taken all the blame on myself, but honestly I am disappointed that it took you a day and a half and 5 posts to answer my question about how to open the connection.
The set was nowhere near scrap. It took a while to clear most of the lines after being turned on, otherwise it was working perfectly. By now it may be scrap.

[newtothis]

Re: Toshiba 46XF356 T-conn problem

Why so touchy, newtothis? I have taken all the blame on myself, but honestly I am disappointed that it took you a day and a half and 5 posts to answer my question about how to open the connection.
The set was nowhere near scrap. It took a while to clear most of the lines after being turned on, otherwise it was working perfectly. By now it may be scrap.

The way you came on here and said about if you had been told immediately.... Now you say a day and a half yet I answered it the same day you posted the picture of the TCON after I asked in my first post for the picture.

The way you worded the reply was saying (and in the one I am now quoting) that it is our fault for not telling you instantly.

If you had provided the picture in the first post then I would of answered it in my first post.

Reason I have my back up about it is that we take our time to help people and then the ones that don't bother to follow and do as we ask usually complain about it being broken.

Also take note of the panel was at fault anyway and you were not going to fix it, TCON is irrelevant to that.