Coby ledtv2326 disassembly?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • whiz62
    whiz62
    • Dec 2013
    • 242
    • usa
    #1

    Coby ledtv2326 disassembly?

    Told a buddy I would look at this and wondering if anyone has taken the back off one of these. only screws are 8 small machine screws for power plug and where inputs are.

    I know it is the low end of TV's but I can't stand something not working without knowing why. Would appreciate input if anyone has knowledge on how to get back off without destroying it. Sorry for the bad pics. Thanks
    Tags: None
    • whiz62
      whiz62
      • Dec 2013
      • 242
      • usa
      #2
      Re: Coby ledtv2326 disassembly?

      couldn't see pics, so here they are again.
      Attached Files

        Comment

        Previous template Next

        Related Topics

        Collapse
        • howardc64
          A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
          by howardc64
          Problem

          This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
          08-04-2024, 10:36 PM
        • Flaku_34
          Acer Nitro XV273 and Predator XB273, look inside and disassembly guide.
          by Flaku_34
          Introduction:
          Hello everyone, this topic is more of a knowledge sharing and look inside type of post, but for someone working on this model of display it might be useful. Recently I bought Acer Nitro XV273 XB MIIPRZX with busted electronic, but screen was intact, price was incredibly low, so I took a gamble and bought the unit and try to fix it. As I dug inside, I found out that my motherboard was not responding, although all voltages seemed fine. I wasn't able to find any reliable information about this monitor on the web (only some pictures of motherboards from Ebay). By some research...
          13 Photos
          04-18-2024, 12:47 PM
        • Widget
          Anyone repaired Ionmax ION390? I have extra screws :(
          by Widget
          Hi all,

          Re-assembling a Ionmax ION390 air purifier after removing the top LCD control panel, I seem to have 2 extra screws that I, for the life of me, cannot see where they go. I've taken a couple of pictures, buuuuut there's always that one picture you need, but you didn't take :/.

          I know it's a long-shot but has anyone repaired this before would have an idea?...
          04-26-2023, 11:15 PM
        • A94M
          Sony XBR-55X850C Stripped Screws
          by A94M
          I'm currently in the process of replacing the LED backlight strips and during the midsts of getting the outer bezels off, in order to take off the screen, I stripped a couple of the tiny screws. Does anyone have an idea of the type of screw/size so I'm able to replace them? I'm just wondering if it's a specific non-conductive metal or not... a bit hesitant on going to the local hobby lobby, matching them up size wise, turning the tv on and then having it explode because it was the wrong metal lol

          I was able to extract the few stubborn screws using a Dremel, and making a notch for...
          11-15-2020, 09:08 PM
        • jstiene
          Stand Legs Screws - Standard Size?
          by jstiene
          Hello.

          I am in need of ordering replacement stand screws for a few different TV's...TCL / Vizio / Hisense. They all seem to be similar screws. I think they are M4 x ??. Does anyone happen to know what the most common size and length size is and where I can get them in bulk?

          Thanks for any recommendations in advance.
          01-18-2021, 07:54 AM
        • Loading...
        • No more items.
        Working...