Hi all got this samsung with no backlight or image, I believe the set is on as it flashes during startup then responds to remote signals
Now when I unplug the main board the back lights work so they and power are ok, had a set like this befor and had to replace the main due to suspected EPROM corruption
Now I wanted to try a factory reset but obv very hard with no image
Can some one go into engineers menu on a c series ( the newer type menus I believe ) and count the direction and number of presses to do a reset ?
Worth a go but I don't have another samsung of the same series here
Thanks all
Now when I unplug the main board the back lights work so they and power are ok, had a set like this befor and had to replace the main due to suspected EPROM corruption
Now I wanted to try a factory reset but obv very hard with no image
Can some one go into engineers menu on a c series ( the newer type menus I believe ) and count the direction and number of presses to do a reset ?
Worth a go but I don't have another samsung of the same series here
Thanks all
Comment