Magnavox 50MF231D/37--6 BLINK CODE

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cadar21
    Senior Member
    • Oct 2010
    • 53
    #1

    Magnavox 50MF231D/37--6 BLINK CODE

    Hi..guys im hoping some of you have run into this problem....
    i bought a Magnavox 50' with a 6 blink code.. and it wouldnt turn on...
    i unplugged the power-cord and held down the power button for 1 min...
    Plugged the cord back in and It turned on .. but it looks weird...
    the screen is all pink an purple..

    Is my tv no good or do i need a new board... there's also some bussing sounds coming on start up..
    Attached Files
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • cloo
      Panasonic ZT60 plasma tv with strange behavior and 8 blink code
      by cloo
      I recently got my hands on a 60" Panasonic P60ZT60 plasma tv (european model) that has some strange issues along with an 8 blink code.
      It know this tv is getting old but it was once considered one of the best plasmas ever made, and i think it is still holds on to that even by todays standards.


      So, long story short. When i first got the tv it had a very bright washed out picture with very raised blacks in all picture modes and i couldn't find the cause in the picture setting menus.
      After doing a factory reset this problem was gone and the picture was back to...
      01-06-2025, 06:02 AM
    • rmacintosh
      Panasonic Plasma repair - TH-P60GT50 - Dead, 3 blink code
      by rmacintosh
      I aquired this Panasonic 60" plasma around the time my first child was born. It was meant to be a project tv, hoping to fix it chipping away at the repair in my free time. Well that was 2 years ago and i'm really just getting around to making a sincere effort to see if I can ressurect this beast.



      The symptoms of the tv ar as follows:
      • Plug AC in to back of TV
      • After about 2 seconds the relay on the P-sub board will click on and then a fraction of a second later it clicks back off
      • The 3 blink code is given by the power LED
      • If the TV is unplugged and then
      ...
      03-14-2020, 12:24 AM
    • Document Archive
      LCD LED TV Service Menu Codes
      by Document Archive
      ALL LCD LED TV SERVICE MENU CODES

      Service Menu Code with Board Name

      China Universal Board / Jumper Board Service Menu Code
      Changhong Ruba Service Menu Code
      Ecostar LED TV Service Menu Code
      Orient LED TV Service Menu Code
      Haier LED TV Service Menu Code
      TCL LED TV Service Menu Code
      Samsung LED TV Service Menu Code
      LG LED TV Service Menu Code
      Videocon LED TV Service Menu Code
      Supra LED TV Service Menu Code
      Toshiba LED TV Service Menu Code
      Symphony LED TV Service Menu Code
      Veste/ LED TV Service Menu Code...
      10-31-2024, 03:58 AM
    • reporter1979
      2 red blink code on old led tv Sony KDL-40W2000
      by reporter1979
      Hi all, the TV KDL-40W2000 was flashed by a lightning.
      Firstly I got the 3 red blink code.

      Following other threads I changed the power supply board and got always 3 blinks.
      So I changed also the mainboard and now I get 2 blinks error code. Tried also with the other ps board, still getting 2 blinks.

      The TV turns on for a minute or two with green led and blank screen, if I press buttons the green led blinks fast. It turns to 2 red blinking led after a while.
      What else can I do?...
      02-17-2023, 11:50 AM
    • loran
      Dell AW 13 R3 with cpu failure blink code
      by loran
      Hi all!

      I was working on my emails and suddenly the system crashed in an instant. No life sign at all. Not even power leds.
      On the mainboard a mosfet was burnt (see picture) so I decided to replace the two mosfets with new AON7422G.
      The part numbers are PQ300 and PQ301 (see schematics).

      After the replacement the laptop shows 2 red and 1 blue blink code.
      That's a cpu failure code according to Dell.
      Does that mean the repair went well?

      I read that a corrupt bios could be the cause for cpu failure code so I created a bios dump...
      11-14-2020, 05:31 AM
    • Loading...
    • No more items.
    Working...