philips 42PFP5332D/37

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • basros
    New Member
    • Sep 2014
    • 4
    • United States
    #1

    philips 42PFP5332D/37

    hello there
    I recently came by a philips 42PFP5332D/37 plasma TV when I took the back
    off I discovered that someone had removed the power board and the
    interconnect board so I don't have any part numbers for these 2 boards

    Is there a wiring harness between these boards

    Is there somewhere I can get a picture of what is supposed to be in the upper
    half of the TV so that I could replace what is missing.

    As far as I can see the main board the sustain boards are intact
    as well as all the boards under the metal housing.

    If someone could help me find the information I need
    I would like to rebuild the set and keep it from the landfill
    Tags: None
    • Truncatedhose
      Badcaps Veteran
      • Oct 2014
      • 343
      • United States
      #2
      Re: philips 42PFP5332D/37

      Here is the part number for the Power Supply board for models with YA1A serial number: 996500042146

      for models with serial number YA1C: 996510010206


      Here are some pictures of the Power Supply installed in the TV: (not sure if exactly as yours, but hopefully.

      http://www.universulelectronicii.ro/.../42PFP5332.JPG

      http://ww2.justanswer.com/uploads/er...asmaPwrCBA.jpg

      What is the interconnect board you speak of?

        Comment

        • selldoor
          Slow Learner
          • Dec 2010
          • 7870
          #3
          Re: philips 42PFP5332D/37

          I would suggest before you spend any money on it you thoroughly check the panel.
          If someone removes boards and discards a tv it is often because of a panel fault.
          Odd if they left in the Ysus zsuz and buffers unless they knew they were bad
          Please upload pictures using attachment function when ask for help on the repair
          http://www.badcaps.net/forum/showthread.php?t=39740

            Comment

            Previous template Next

            Related Topics

            Collapse
            • m1ch43lzm
              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
              by m1ch43lzm
              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
              05-12-2025, 08:37 PM
            • tuner2000i
              Philips 65PUS8518/12 distorted image after main board replacement
              by tuner2000i
              hello everyone,

              I don't normally do tv repairs but this is a case with my personal TV which got fried together with many other electronics in my house after a thunderstorm.

              The TV is a Philips 65PUS8518/12 which had no power. I measured and concluded that the main board was probably fried through ethernet or hdmi. I found a board with same number 715GD328-M0F-B00-005Y (I had G) but from a 55PUS8518. The TV starts but the image is doubled, distorted. I need to set the panel code which is 016 according to the sticker on the back but I can not seem to do it.

              ...
              07-15-2025, 01:15 PM
            • howardc64
              TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
              by howardc64
              All left and right refers to looking from rear of TV (or looking from front with TV upside down)
              • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
              • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
              ...
              07-24-2025, 05:17 PM
            • howardc64
              A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
              by howardc64
              Problem

              This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
              08-04-2024, 10:36 PM
            • silikon77
              Philips 70PUS7855/12 bad colors when applying the tape fix on teh T-con board
              by silikon77
              Hi!
              Got an 70 inch Philips tv model 70pus7855/12 from scraps and I decidet to give it a go. I'm an enthusiast but no porfessional in the electronics.
              Found some advices watching youtube nad came up with this:
              It came with no picture, after diagnosing it I found out that the right side of the T.con board was faulty.
              I taped down the clock signals and I got a picture but the left side of the panel has less pronounced colours. Only the right 3rd side of the panel has good colors.
              See attached picture.

              I tried a few combinations to block individual clock...
              1 Photo
              01-02-2025, 02:26 PM
            • Loading...
            • No more items.
            Working...