Hi everyone, I have this lcd tv that has sound but no picture. when powered on the screen flashes on then off then on then off again, green light stays on. The picture can be seen on the second flash and I can see the images when I shine a light onto the screen. I have read all about the inverters having problems especially the slave. I was getting a buzzing from the slave board so I decided to convert this tv to a single inverter tv. I installed the single inverter and I get the same thing, 2 flashes then off. Is it going into protection mode still and needs to be reset somehow or is it something else? I did look at the bulbs and they look really good, no blackened ends. This is the board I bought on ebay.
http://www.ebay.com/itm/Better-INVER...3D221487780487
http://www.ebay.com/itm/Better-INVER...3D221487780487