Announcement

Collapse
No announcement yet.

Samsung LE46M87BD

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Samsung LE46M87BD

    turns it's self off after 10 mins of use, then turns on and off sometimes 2 or more times, then will stay on with out any probs for hours ?
    any ideas on this one.

    #2
    Re: Samsung LE46M87BD

    pictures of the boards may help

    Comment


      #3
      Re: Samsung LE46M87BD

      What have you tested so far?
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment


        #4
        Re: Samsung LE46M87BD

        Been testing all input on main board, still turns off and on no matter what input is used, but only when using freeview will the picture freeze for upto 30 seconds before turning off,
        Looks like someone has been in here within the last few weeks as had some caps replaced and there clean with no dust,
        I have i soldered them to check and even though that are cheap and nasty caps, that read fine.
        Looking like a main board fault, as all readings from power supply look good,
        I'll get some pics up tomorrow, as can't get them to go up here on the phone,
        Attached Files

        Comment


          #5
          Re: Samsung LE46M87BD

          This is what I would look at.
          Attached Files

          Comment


            #6
            Re: Samsung LE46M87BD

            right, well just got back on here to see if any replys, and yes, but the pic with sergested ideas is well above my head.
            think i'll just put it up for sale,
            thanks for replys guys.

            Comment


              #7
              Re: Samsung LE46M87BD

              One possible cause are cold solder joints, hit slightly the pcb with a screwdriver's handle and moove connectors while ON to see changes.. especially the main board
              Last edited by Davi.p; 01-17-2015, 09:03 AM.

              Comment

              Working...
              X