T-con proplem

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • rkm
    Member
    • Sep 2014
    • 17
    • ICELAND
    #21
    Re: T-con proplem

    Ok I got a nother T-con from aliexpress seller "He decided to send me another one." And the status is diffrent now with new T-con. I have good picture for 10 minutes after I turn it on, cold. After this 10 min "tv warm" The picture start to bleed with some red. I have tried to clean the cable to t-con bud with out success. Is possible that it is somthing else ? something on main board or powerboard ? I dont see any bulp caps by the way.

      Comment

      • rkm
        Member
        • Sep 2014
        • 17
        • ICELAND
        #22
        Re: T-con proplem

        here are some picture after the tv have warmt up
        Attached Files

          Comment

          • rkm
            Member
            • Sep 2014
            • 17
            • ICELAND
            #23
            Re: T-con proplem

            Anyone ?

              Comment

              • CAIIIA
                Member
                • Mar 2012
                • 14
                • Russia
                #24
                Re: T-con proplem

                http://monitor.net.ru/forum/viewtopic.php?t=375748 There are a lot of useful information for your problem. Please read it.

                  Comment

                  • rkm
                    Member
                    • Sep 2014
                    • 17
                    • ICELAND
                    #25
                    Re: T-con proplem

                    Ok thanks. We are on the right way. I maid a cirkle around 2 parts which had a bad solder now are picture ok bud sound are somtimes missing. When I turn tv on and after 2-3 hours the sound are in and out
                    Attached Files
                    Last edited by rkm; 01-26-2015, 03:09 PM.

                      Comment

                      • Alastair E
                        Chief Womble
                        • Mar 2013
                        • 1963
                        • U.K.
                        #26
                        Re: T-con proplem

                        Eee Gads, VESTEL crap gets as far as Iceland.....!

                        Looks like a 17MB26 or summit like that. Utter junk.

                        Send that T-Con back and get another with the correct part-number, pref. from a UK seller--at least it'll be original.
                        TELEFIX

                        How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
                        http://www.irf.com/technical-info/appnotes/an-1088.pdf
                        PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

                          Comment

                          • rkm
                            Member
                            • Sep 2014
                            • 17
                            • ICELAND
                            #27
                            Re: T-con proplem

                            T-con is working fine at least not a proplem at the moment and if you read all the post there was maid changes to T-con.

                              Comment

                              Previous 1 2 template Next

                              Related Topics

                              Collapse
                              • advant
                                Driving a Sharp TCON/panel with a universal main board
                                by advant
                                This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                                I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                                02-03-2020, 12:25 AM
                              • Stanley1843
                                Screen Display Vertical Multicolor Lines
                                by Stanley1843
                                Hello, I have a screen in where sometimes when I open it pop-up vertical multicolor lines (I would say the most of them are green). If I tun off and turn on the screen the lines dissapear or if I leave open the screen after approximately five minutes the lines gone. I measured the below voltages on the main PCB and on the T-CON board and the voltages are the same when it doesnโ€™t display the vertical lines and when it displays the vertical lines. Also, I cleaned all the connectors very good with IPA. I moved back and forth the connectors and the COF tabs but the vertical lines didn't displayed...
                                06-29-2024, 11:54 AM
                              • Daren87
                                Sony 8K XBR-75Z8H White Screen Vertical Bars Tcon Code. Help Needed๐Ÿ™
                                by Daren87
                                Hello everyone,

                                I've recently been given a Sony 8k Z8H. It's got a white screen with two vertical black bars. At times it's given me the 5 blink Tcon code. Testing voltage on the Tcon I can see some low or missing voltage. I've done a basic visual check of cables and the COF. Not seeing anything obvious. The original Tcon seemed to have good caps until turning it over. On the bottom I found maybe 10 caps with both sides of the caps shorting to ground. I thought ok these caps and likely other components on the Tcon are shorted so let's try a replacement Tcon. I just received the...
                                08-13-2023, 03:25 PM
                              • x_orange90_x
                                TCL 50S535 bad tcon or panel issue?
                                by x_orange90_x
                                Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
                                03-29-2025, 11:02 PM
                              • alltvrepairs
                                Lg TCon test pins for screen test
                                by alltvrepairs
                                Hi,
                                i have a 65 Panasonic TX-65HX710E using vestel 17MB170 main and Lg tcon.

                                Few drops of water fell probably near COF and have no display. Tried removing tabs but no.part of display present as if tcon fuse open. However 12v is present and tcon can be felt warm enough that supplies are present. Backlight and sound ok.

                                Anyone knows if this TCon 6870c-0805A has any special test pins for rgb test?

                                Appreciate your help....
                                2 Photos
                                06-13-2025, 06:33 AM
                              • Loading...
                              • No more items.
                              Working...