Hello everyone,
Need some help or assistance please on a Vizio E701i-A3. Working on one where the power comes on using either remote or side panel power button. When power on, the backlight comes on and stays on, just no picture. I suspect it's a bad T-con board model RUNTK5261TP-ZH. When I measured the F101 fuse, label (5A @32V), getting less than 1 V. I suspect it to be bad. So, I order one off of Ebay and put in in. No change, still getting the backlight on, no picture. But with the new tcon board in there. I am getting a 12.32V reading, but not the 32V. Is it supposed to be a full 32V for the picture to come on? Did I buy a bad Tcon board? Can anyone please advised. Thanks in advance.
Need some help or assistance please on a Vizio E701i-A3. Working on one where the power comes on using either remote or side panel power button. When power on, the backlight comes on and stays on, just no picture. I suspect it's a bad T-con board model RUNTK5261TP-ZH. When I measured the F101 fuse, label (5A @32V), getting less than 1 V. I suspect it to be bad. So, I order one off of Ebay and put in in. No change, still getting the backlight on, no picture. But with the new tcon board in there. I am getting a 12.32V reading, but not the 32V. Is it supposed to be a full 32V for the picture to come on? Did I buy a bad Tcon board? Can anyone please advised. Thanks in advance.
Comment