Try our *UPDATED* boardview, bios, & schematic search. Over 2.3 million files for download!

Needed: HiTool-DPT-4.0.21 (or any 4.0.20+) with Hi3751V553 — for T.HV553.81 board

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • harshgehlod1787
    New Member
    • Oct 2026
    • 1
    • India

    #1

    Needed: HiTool-DPT-4.0.21 (or any 4.0.20+) with Hi3751V553 — for T.HV553.81 board

    Hello, I am repairing a 65" TV with mainboard T.HV553.81 (SoC HiSilicon Hi3751V553, 1GB RAM / 8GB eMMC, panel BOE HV650QUB-N9A). The system partition is corrupted (System UI / app crashes, stuck on logo) and I want to read/write the eMMC over the board's UART serial header using HiTool/HiBurn.

    Problem: HiTool-STB-5.x and HiTool-DPT-4.0.13 do NOT list Hi3751V553 in their chip/device list (checked both myself). A video by GLC Learning Center ("HiTool Application Software Read/Write, TP.HV553.PC821") shows an older 4.x build (HiBurn 4.0.21) with Hi3751V553 in its Switch Device list, so I am looking specifically for HiTool-DPT-4.0.21 (4.0.20 or 4.0.22 would also help).

    I already have the firmware file — I only need the tool itself. If anyone has this version, please share it. I will verify the chip list before any use. Thank you!

Related Topics

Collapse

  • Tynan Dill
    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
    by Tynan Dill
    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

    Upon bringing it home and plugging it up, it showed a standby light.

    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

    The screen seems to blackout and stay black, but with a flashlight I can see the display.

    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

    Assuming...
    11-22-2024, 01:46 PM
  • m1ch43lzm
    HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
    by m1ch43lzm
    Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
    Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
    05-12-2025, 08:37 PM
  • hartleyhare5
    Samsung QE65Q9FN — BN44-00944A (65A board) MOSFET failure (relay clicking on one connect) — advice before power-up
    by hartleyhare5
    Post body:

    Hi all,

    I'm working on my Samsung QE65Q9FN (65" Q9FN QLED, European model) with relay clicking and no picture. The power supply board in the display itself is the BN44-00944A, known on the board itself as the 65A board (silk-screened designation). There is also a second board, the 65B, which looks identical but is only partly populated for the LED power.

    Symptom: Continuous relay clicking on the one connect — TV will not start up, no picture. However the standby LED is on constantly — so the standby supply rail appears to be alive and the...
    03-26-2026, 03:47 AM
  • TheIbz
    LG 34GN850-B full-screen vertical stripes — diagnosed to the main board, sourcing from China.
    by TheIbz
    My 34GN850-B (2023 unit) suddenly started showing dense vertical stripes across the entire screen — backlight fine, image actively driven but completely shredded. OSD doesn't render either, which rules out GPU/cable/source. Tore it down and did the full diagnostic pass:

    - Reseated and cleaned the LVDS/data cable at both ends (board side P302 and panel side CN1) — no change

    - Backlight connectors (F1/F2) reseated — no change (backlight was never the issue)

    - No bulged caps, no burn marks, board visually clean

    - This model has no discrete...
    09-22-2026, 10:25 AM
  • EpicFix
    PS5 Board EDM-033 One Beep No Power Issue (Help needed)
    by EpicFix
    Hey guys, I have PS5, one beep, no power with an EDM-033 board. Power supply checked out good. F7001 blown. One of the USB ports is damaged (missing blue insert). Did voltage injection (2V, 1A) on the left side of the fuse (this side was continuous with ground). See attached picture for reference. Didn’t feel anything hot on the board, amp consumption dipped briefly but came back @ 1A, however voltage draw was around 1.5V (bench supply dropped from 2V to 0.5V). I checked the other side of the board following the vias. Same voltage injection. No heat felt. Any where on the board. Both caps near...
    06-11-2026, 09:45 PM
  • Loading...
  • No more items.
Working...