42PJ350 clicking noise

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Jim1303
    New Member
    • Dec 2014
    • 3
    • The Netherlands
    #1

    42PJ350 clicking noise

    Hi everyone,

    I know that there are multiple treads on this subject but none of them seem to be exactly like mine, as far as I understand them (I am no technical guy...) So here is the problem, whenever I power it on, the TV shows nothing on the screen whatsoever (nothing at all!), it clicks twice, gives a kind of buzzing sound, clicks once and then repeats this cycle. The threads that I have read, mention buying all kinds of new boards or parts....isnt it better to just buy a new TV, I mean this one is from 2010...

    So I am open to any suggestions on how to fix this one...

    Cheers!

    Jim
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: 42PJ350 clicking noise

      First please post pictures of the parts inside the set... it is important they are of your set because manufacturers can frequently change the design.

      Do you have a digital multimeter available?
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • Jim1303
          New Member
          • Dec 2014
          • 3
          • The Netherlands
          #3
          Re: 42PJ350 clicking noise

          Hi Tom,

          Thanks for getting back to me mate! I have attached the pictures as you asked. Its one picture of the entire back of the TV and three pictures of the left, middle and right part. I hope they are good enough to work with. As for the meter, as we speak I'm trying to get my hands on one. As soon as I have one I'll get back to you. In the mean time, can you tell anything just from looking at the pictures? Many thanks!

          Jim
          Attached Files

            Comment

            Previous template Next

            Related Topics

            Collapse
            • NConstantinou
              HP Z840 workstation power supply clicking noise
              by NConstantinou
              No power
              i have the above ps which i change the TOP258eg ic.
              Now i have power but is clicking and voltages are flutuating. I change all capacitors, i test all mosfets and all are ok.
              i am wondering what is the value of R901! I am getting 0.5Ohms. Is that correct!
              the colours look like R,R,W or silver,G Bl.

              Thanks...
              12-25-2024, 02:24 AM
            • tony359
              Removing electrical noise introduced by fan
              by tony359
              Hi all,

              I am working on a sound processor, it tends to overheat so I fitted a fan inside. The fan is connected to the +15V of the PSU via a DC-DC converter based on the LM2596 to reduce the voltage to around 10.5V.

              Unfortunately the analogue circuitry is picking up the noise from the fan in two ways:
              1. The fan is close to the analogue section, the motor itself gets into the outputs so I'll have to move it somewhere else
              2. Even with the fan running outside of the case, there is still some noise which is clearly going back to the processor via power line....
              2 Photos
              11-28-2023, 05:18 AM
            • MegaZAC
              Onkyo TX-SR805 noise in one channel
              by MegaZAC
              Surprisingly enough, this receiver doesn't have the DSP chip issue. The HDMI board does not get hot, and sound over HDMI works fine.

              Regardless of the input, the right channel has noise that is clearly noticeable even on average volume level. The only cases when there's no noise is when VCR input is selected (some tracks on the board are damaged, maybe that's why), or if HDMI input is selected but nothing plugged into it. In all other cases, even when no input is connected I still have the noise.

              There's some logic behind it. As soon as I select an input I get only left...
              04-23-2025, 10:09 PM
            • B0r1s
              Samsung UE49KS7000SXXH - fast clicking sound in standby mode
              by B0r1s
              PSU - BN44-00878A

              Symptoms:

              The TV turned itself off, and I haven't been able to turn it back on. The standby voltage was unstable and lower than it should be.
              A weak clicking sound was coming from the transformer.

              Video with clicking sound:https://www.youtube.com/watch?v=lAduhjNtqCA

              Progress:

              After the transformer, I measured four Schottky diodes. DM862C and DM864C diodes readings were 003 in both directions. After detaching them from the circuit and measuring them, DM864C was the shorted one. These Schottky diodes are SB550.I...
              01-17-2023, 04:58 PM
            • Sisko
              Onkyo-593 No power and now clicking sound
              by Sisko
              Hi all!!

              Ok just got a Onkyo SKW-593 sub woofer that has no power person told me that it smoked and that his GF let the volume full when she powered off the amp and when he came to turn it on the sub played but then suddenly smoke was coming out, didn't say from where. So opened it up and saw a resistor made of metal (pic) but can't see any writing on metal par so what ever was written on it was burnt. So I'm kinda stuck here with this. I did ask for a repair or schematics in the other group section and waiting for this but I hope someone here might lend me a hand to try and identify...
              Schem
              4 Photos
              Yesterday, 02:18 PM
            • Loading...
            • No more items.
            Working...