Try our *UPDATED* boardview, bios, & schematic search. Over 2.3 million files for download!

Samsung BE75T-H (UN75TU7000) only turns on sometimes

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • momo2000
    Member
    • Oct 2017
    • 23
    • USA

    #1

    Samsung BE75T-H (UN75TU7000) only turns on sometimes

    BE75T-H is the commercial version of UN75TU7000 / UN75TU8000. This TV is in our neighborhood clubhouse and was reported as not being able to turn on, so I was asked to look at it. I am one of the residents.

    On the first occasion, after about 15mins of unplugging, pressing/holding the on/off button, trying and trying I got it to come on. Once it was on, it was able to turn off, and immediately was able to turn right back on without issue, seemed to work perfectly. The next day, I was not able to get it to turn on, but again after about 30mins of unplugging, pressing/holding the on/off button, trying and trying I got it to come on. Again, once it was on, it was able to turn off, and immediately was able to turn right back on without issue, seemed to work perfectly. I tried it today and the first time, I got audio but not video (this happened once before during my tests), and didn't try any more.

    I have recorded/attached a video of the flashes of the power light (two flashes I think). Also this TV has been in an outdoor, but "protected from rain" location for 2 years. I'm thinking this the power supply board. What do you all think? Thx.
    Attached Files

    Premium supporters get full download access and other benefits.

  • Davi.p
    Hobbist Tech
    • Sep 2009
    • 4889
    • Italy - Milan

    #2
    Hi, bad news for you, unfortunately todays flat tv are not suitable for outside working, and the manual should say it, nor them are for inside with eventuals smokers room, two blinks is lcd panel fault so a full restoration will never happen, there is the today old method of masking / cutting lines, a true sucking method and you can find plenty of discussions about it on this board with everything you need, also something you don't need (various bickering)... bye!

    Comment

    • tom66
      Back Again?
      • Apr 2011
      • 32839
      • UK

      #3
      Before the panel is condemned, it's a good idea to test supply voltages inside the TV to see if the fault is the power board or main board.
      Please post a picture of the inside of the TV circuit boards and indicate your level of competence (amateur, experienced hobbyist, professional tech etc.), do you have a multimeter, access to other tools, know how to measure voltages?
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!

      For service manual, bios, schematic, boardview (board view), datasheet, cad - use our search.

      Subscribe to support us. It only takes 1 minute: https://www.badcaps.net/settings/subscriptions

      Comment

      • momo2000
        Member
        • Oct 2017
        • 23
        • USA

        #4
        Thanks Davi.p and tom66 for the comments. 100% agree on the environmental issue, I didn't purchase or install. One more update, I did check on it the past two evenings (so it was dark, vs my previous attempts) and it did turn on both times (full picture), but then went off after a few seconds, then the screen lit up dimly (no pic, just light), and then went dark, and then it repeated the patter of lighting up dimly, and then dark. I'm guessing that I didn't see this during the day time test.

        I do have moderate skills, meaning I have and can operate a multimeter and know how to measure voltage. About 6 yrs ago, I took apart another Samsung and traced down the issue, order from ShopJimmy and replaced an IR receiver board. So I'll see if I can test voltages, if you have a pointer to a guide that is great, otherwise I'll search. I think we may just have to get a new TV in the short run . . . but now I HAVE to trace down the actual problem for my own satisfaction/sanity! 😉 It will be a bit before I can get it unmounted and get inside, but I will post results. Thx!

        Comment

        • Davi.p
          Hobbist Tech
          • Sep 2009
          • 4889
          • Italy - Milan

          #5
          A further note: every Lcd or plasma (partially OLED) display can be made protected by outside / inside places attacking elements thus the usual two planned obsolescence issues / traps, and maybe also easily, never did this but you can try it,
          1st: protect BGA chips by surrounding them with hot glue : no more overheating > cracks
          2nd: find a proper substance to insulate the sticky zone where cof tabs of the panel attaches to the
          panel strip pcb, you can use some drops of solder mask or spray maybe polyurethane foam, this is risky, avoid spilling to the panel glass

          so you can enjoy flat tv on outside and inside with a lot of smoke (well , this hurts plenty humans, side effect)

          Comment

          • Random Bloke
            New Member
            • Sep 2026
            • 8
            • UK

            #6
            Please stop suggesting hot glue around BGA chips. It does not protect them.

            Comment

            • Davi.p
              Hobbist Tech
              • Sep 2009
              • 4889
              • Italy - Milan

              #7
              have you tried? if you haven't you don't have the right to ask a thing

              Comment

              • Random Bloke
                New Member
                • Sep 2026
                • 8
                • UK

                #8
                Why would I try something that is nonsense ? I've done BGA reworking for many years.
                Hot glue is not something you'll find being applied by anyone doing BGA rework.

                Comment

                • Davi.p
                  Hobbist Tech
                  • Sep 2009
                  • 4889
                  • Italy - Milan

                  #9
                  So it's clear your point of view, i will never stop until i see personally a chip dieing the same or worse, bye

                  PS: i can't wait 5 years to see and suggest, a glue surround never hurts, this is the most important

                  PPS: ah ok you job is reballing, so i'm mining your job, i can't do anything for you sorry
                  Last edited by Davi.p; 10-05-2026, 03:10 AM.

                  Comment

                  • tom66
                    Back Again?
                    • Apr 2011
                    • 32839
                    • UK

                    #10
                    I agree withRandom Bloke, hot glue is probably not going to work to save a BGA, since the problem is the solder balls and not the package flexing. BGAs often have underfill in applications where they're subject to high shock, e.g. smartphones, and this can improve longevity (but makes any necessary rework more difficult).

                    However, this discussion is not relevant here, let's focus on the OP's TV. I suggest creating another thread to discuss BGA techniques: any further discussion will be moved or deleted.
                    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!

                    For service manual, bios, schematic, boardview (board view), datasheet, cad - use our search.

                    Subscribe to support us. It only takes 1 minute: https://www.badcaps.net/settings/subscriptions

                    Comment

                    • Davi.p
                      Hobbist Tech
                      • Sep 2009
                      • 4889
                      • Italy - Milan

                      #11
                      Tom excuse me, the op has an hard problem to solve, and probably he does not solve it, or partially, i already said that the problem is been discussed milions of times, where i have to go to to communicate withh him a suggestion for future purchases? Prevention is better than cure, it's important to tell it now, you can discuss the fault with no interference..
                      for the suggestion: no it's no chip flexion, it's a sealing purpose, i think i always mention it, let the op think if suggestions are important or wants only repair present set. Thanks
                      Last edited by Davi.p; 10-05-2026, 11:44 AM.

                      Comment

                      Related Topics

                      Collapse

                      • Boardview and Schematic Bot
                        Samsung Galaxy Tab S / E SM-T805W SM-T800 SM-T378V SM-T805W Schematic & Boardview
                        by Boardview and Schematic Bot
                        Samsung Galaxy Tab S / E SM-T805W SM-T800 SM-T378V SM-T805W Schematic & Board View

                        Samsung Galaxy Tab S 10.5 SM-T805W.sch.pdf
                        Samsung Galaxy Tab S 10.5 SM-T800.pdf
                        Samsung Galaxy Tab E 8.0 SM-T378V.pdf
                        Samsung Galaxy Tab S 10.5 SM-T805W.bv.pdf...
                        09-29-2026, 10:33 AM
                      • Boardview and Schematic Bot
                        Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
                        by Boardview and Schematic Bot
                        This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                        09-07-2024, 05:50 AM
                      • JohnML1975
                        Samsung PS51F5000AM TV will not turn ON and show image or sound
                        by JohnML1975
                        Hello All

                        Have this TV
                        Red standby light is ON
                        Turn TV ON
                        No image and no sound
                        No Samsung logo and no samsung sound on boot up

                        I cannot turn TV off with remote or the power switch

                        Have to disconnect the power cable
                        Then I can repeat the above

                        going to remove the back cover and take a look
                        04-02-2026, 06:53 PM
                      • Egidio85
                        Samsung UE55F8000SZ Turns on and off immediately
                        by Egidio85
                        good morning, I have a samsung UE55F8000SZ tv that turns on, shows the logo and turns off after 1-2 seconds.
                        This defect happens continuously, hearing the classic click of the relay every time.

                        Power supply board BN44-00636B

                        disconnecting the mains and lamps from the power board always causes the same problem.
                        Is it normal that without anything connected this power supply turns on and off cyclically?
                        any suggestions on what to check?

                        thanks in advance
                        ​
                        03-11-2025, 12:45 PM
                      • menschentoaster
                        Thinkpad turns off when power rails turn on
                        by menschentoaster
                        Its a Thinkpad T590 with a NM-B931 board. When pressing the power button, the power LED goes on, caps lock lights up (isn't intractable tho), there is no display, no fan spin, and it turns off after about 4s (sometimes shorter)

                        I'm very much a beginner, so I really dont know what I'm doing, but I started measuring voltages. Standby voltages are all on. Here is how it becomes difficult for me. S3 and S0 voltages might be there. It's hard to tell, because the board immediately switches off when the power regulators for S0 and S3 turn on. I don't have an oscilloscope (and I wouldn't...
                        03-28-2026, 02:15 PM
                      • Loading...
                      • No more items.
                      Working...