Try our *UPDATED* boardview, bios, & schematic search. Over 2.3 million files for download!

Samsung ue50mu6122 no power

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • porfyriadhs
    Senior Member
    • Oct 2023
    • 100
    • Greece

    #1

    Samsung ue50mu6122 no power

    Hello I have problem with a Samsung tv model ue50mu6122 was hit by thunder and now is not working. No standby light nothing
  • porfyriadhs
    Senior Member
    • Oct 2023
    • 100
    • Greece

    #2

    Comment

    • EazyBone
      Badcaps Legend
      • Jun 2023
      • 1434
      • United states
      • Anything I can do with my hands

      #3
      Did other electronics die also? Lightning will destroy multiple items.

      Check fuse on power supply

      Comment

      • tom66
        Back Again?
        • Apr 2011
        • 32716
        • UK

        #4
        Please post a clear picture of the power board and one of the power connector showing the legend - what each pin output is, e.g. B5V, A5V, B13V, PS_ON...
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!

        For service manual, bios, schematic, boardview (board view), datasheet, cad - use our search.

        Subscribe to support us. It only takes 1 minute: https://www.badcaps.net/settings/subscriptions

        Comment

        Related Topics

        Collapse

        • xbliu.cn@gmail.com
          ASUS ROG Zephyrus G14 GA402R – 19V present but no 3.3V/5V standby, no power
          by xbliu.cn@gmail.com
          Hello everyone,
          I’m looking for help diagnosing a no-power issue on an ASUS ROG Zephyrus G14 (GA402R / GA402RK series). ā— Problem


          The laptop does not power on at all:
          • No LEDs
          • No fan spin
          • No response to power button

          The issue started right after a RAM upgrade. The previous owner mentioned there may have been static discharge during reassembly.
          šŸ” What I have checked so far (with a multimeter)
          • AC adapter is confirmed working
          • 19–20V is present at the DC jack
          • Both input MOSFETs have 19–20V on both sides
          • Multiple inductors near the eDP connector
          ...
          12-13-2025, 11:40 PM
        • Espartaco Smith
          TV Samsung UE40MU6405U, not standby (after power failure)
          by Espartaco Smith
          Hello, as I mentioned in the title, I have a Samsung TV at home, model UE40MU6405U, which is about 5 or 6 years old.

          After a power company failure, the TV stopped turning on and even the standby light wouldn't come on. Over a period of about 10 seconds, the electricity kept going off and on repeatedly, and the TV died.

          The power supply is: L40E6_KSM (BN44-00875A)
          The main board: BN41-02568B

          The power supply board seems to be fine. All the voltages are present. If I disconnect it from the main board, I get backlight.

          I've also checked the...
          12-17-2024, 02:16 AM
        • GLISIT
          Asus Probook P5440UF-XB74 power issue
          by GLISIT
          Hi all,

          TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


          I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

          A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
          01-16-2025, 02:29 PM
        • nathan425
          Samsung UN50EH5300 - No Standby LED, Backlights ON, No Power
          by nathan425
          Hello, I have a Samsung UN50EH5300 in my possession that I'm looking to bring back to life.

          Symptoms:
          • - no power
          • - no standby LED


          What I've done so far:
          - confirmed power supply is OK
          -- CN201 #4 showing 5.3V
          -- BD207 showing 5.3V
          -- removing the cable between the main board and the power board turns on the backlight.

          Pushing the power button on results in no change to any of the pins connecting the two boards.

          - function assembly appears to be NO GOOD
          -- there is no voltage showing on any of...
          11-01-2023, 06:34 PM
        • Chris24
          Samsung UN58J5190 - Doesn't Power on and has Standby
          by Chris24
          Hey everyone - I have a Samsung UN58J5190 with these symptoms: Does not power on, has standby light, standby light blinks 5 times after pressing "power on." When plugged in the power supply is making a very faint ticking sound, and this goes away when pressing power on.

          Following instructions from the great team here in recent posts for Samsung with similar symptoms, I did the following tests:

          I tested with mainboard disconnected from power supply - backlights do not come on (symptoms no change/5 red blinks)

          I tested with T-Con disconnected...
          10-12-2021, 12:43 PM
        • Loading...
        • No more items.
        Working...