samsung UE32F5000AK led no backlight

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • painner
    New Member
    • Aug 2011
    • 8

    #1

    samsung UE32F5000AK led no backlight

    samsung UE32F5000AK led no backlight


    Hello I am wondering if anyone can give me some advice I have a Samsung UE32F5000AK when I turn it on the screen stays blank. I can hear the TV working fine and when I hold a bright torch I can see a picture so I think it's the backlight gone. Can anyone advise me how to fix this as I bought another power board and that didn't fix my backlight?
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #2
    Re: samsung UE32F5000AK led no backlight

    It will be an open circuit LED in the backlight array, the TV panel needs to come apart to fix this.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment

    • painner
      New Member
      • Aug 2011
      • 8

      #3
      Re: samsung UE32F5000AK led no backlight

      many thanks for very quick reply so does that mean one of the leds has gone and I have to track down which one . Don't mind taking it apart again had the led strips out the other day wanted to see what voltage they where because I wondered if I could send that voltage through each strip to check if they were blown

      Comment

      • budm
        Badcaps Legend
        • Feb 2010
        • 40746
        • USA

        #4
        Re: samsung UE32F5000AK led no backlight

        You can make 3VDC from two AA batteries and put 100 Ohms resistor in series with the positive to limit the through the LED, then you can test each LED on the strip one at a time to find out which one is bad, the Anode is positive, Cathode is negative.
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment

        • painner
          New Member
          • Aug 2011
          • 8

          #5
          Re: samsung UE32F5000AK led no backlight

          many thanks for all your help and very helpful advice will look forward to trying this out

          Comment

          • painner
            New Member
            • Aug 2011
            • 8

            #6
            Re: samsung UE32F5000AK led no backlight

            Many thanks found two blown leds jumped that strip to see if works and came on. so now just got to find where to get some spares in UK. Many thanks for you knowledge

            Comment

            Related Topics

            Collapse

            • Document Archive
              Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
              by Document Archive
              This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
              09-07-2024, 05:50 AM
            • C152Heavy
              Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board
              by C152Heavy
              Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board

              Summary for TL-DR readers:
              • Backlight is intermittent, may come on with TV boot or not. No flickering, never fails during TV on.
              • Have obtained Samsung schematic & service documents - Can upload if helpful.
              • Have read ALL applicable threads
              • C1818 and CP820 replaced as low hanging fruit
              • CN802 data taken for normal and failed BL operation. SUMMARY: Pin 2 - 5vDet = 3.52 @normal, 0.0 @BL fail. Pin 6 - EPWM = 1.631 @normal, 1.058 @BL fail.
              • VCC pin (18) of PFC...
              01-11-2023, 02:53 PM
            • sansanpartida
              Samsung QE82Q70RAT no backlight
              by sansanpartida
              Hi everyone!

              Hope you're all having a great day, and thank you very much for stopping by and taking the time to read this post to help me with my parents' Samsung TV.

              My issue: No backlight.

              Model: QE82Q70RAT
              Type No: QE82Q70RAT

              The TV was already serviced by Samsung once under warranty for the exact same issue, but six months after the fix, the backlight went out again. Now, Samsung is asking for nearly the same price as a brand new TV to fix this with the same 6-month guarantee.

              So hopefully, I can fix this cheaper.
              ...
              05-22-2024, 06:56 AM
            • howardc64
              Samsung UN55NU7300F Curved TV. Half side backlight out. Fixed by just removing the rear snap cover
              by howardc64
              TV was fixed just after removing Samsung's rear snap cover.

              This curved TV's construction is rather interesting. When the snapped on back is removed, rest of the TV will relax the curvature. Top of LCD panel is loose as it wants to straighten out against the slightly curved bezel. Snapped back provide most of the curvature shape. So just simple disassembly of rear cover will allow the rest of the TV frame to relax its curvature. Thats probably what fixed it but no idea which connection. 4x LEDs are edge lit.

              Maybe PSU->backlight connector didn't have a good contact?...
              07-23-2025, 12:34 AM
            • howardc64
              Samsung QN75Q6FNA backlight no display, red LED blink 2x, fault in panel
              by howardc64
              • Prior owner tried a replacement main board. No difference.
              • Samsung 2x red blinking standby LED = panel fault
              • Jumpered FB_TRDY_1 (pin 1 CN1300 left. main tcon->left side buffer boards) and FB_TRDY_3 (pin 95 CN1301 right. main tcon->right side buffer boards) This allows testing individual T-Con (on main board) connection to panel on this Samsung. Found fault on left side (viewing from rear of TV)
              • Each side has 2 buffer boards, disconnected left side flex between 2 buffer boards. Fault is on the left most board.
              • Tape masking eventually isolated to CN1300 pin 15 (CKV4_GOA) Display
              ...
              07-19-2025, 10:54 PM
            • Loading...
            • No more items.
            Working...