Panisonic TH-42PZ800b six blink fault

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK
    #21
    Re: Panisonic TH-42PZ800b six blink fault

    Probably not - the power supply does not use fuses on the Vsus portion - so that would not be a likely cause.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment

      • Paniman
        Member
        • Oct 2014
        • 21
        • UK
        #22
        Re: Panisonic TH-42PZ800b six blink fault

        I have checked over the board for any visual burning and none found

        I have checked all the caps in circuit with a meter they seem ok I have checked the MOSFETs on the heat sinks they all seem ok with a multimeter

        That's where my electronic testing skills end

        Any specific places on the board that anyone thinks might cause my problem

        Right now I am thinking take the risk and buy the boards that sordids has

        I just surprised that the loud pop does not show black or burning

          Comment

          • sordids999
            Badcaps Legend
            • May 2013
            • 2149
            • uk
            #23
            Re: Panisonic TH-42PZ800b six blink fault

            update : sent him TNPA4410 TNPA4412 TNPA4413 TNPA4411 he fitted two days ago tv now working

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK
                #24
                Re: Panisonic TH-42PZ800b six blink fault

                Good to hear. Rare fault on these!
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                  Comment

                  Previous 1 2 template Next

                  Related Topics

                  Collapse
                  • Rictech
                    Panasonic SA-MAX770PU SMPSU board fault....
                    by Rictech
                    Hello everyone. 😀

                    As per thread title, this unit has a serious SMPSU fault. It blows F1001, which is a 10A M205 in the phase from the mains input.
                    Very first thing I tried, was simply replacing the fuse, but the replacement ceramic fuse blew immediately.

                    Looking at the schematic for this PSU, I then removed what I thought was the next likely candidate: D1001 - the HV main bridge rectifier.
                    This isolated the fault(no longer blows the main fuse), but does not point me to the actual fault.
                    There are no devices that have exploded or otherwise show signs...
                    08-26-2024, 01:05 AM
                  • Vebririon
                    panasonic TX-P50V10E 6 blink led problem
                    by Vebririon
                    Hi everyone,

                    I'm new here and trying to repair my Panasonic TX-P50V10E plasma TV, which is currently showing the 6 red blink error code.

                    Just for context: I'm used to building PCs and installing modchips in old consoles, but this is my first time trying to fix a TV. I'm French, and while my English is okay, I'm using ChatGPT to help translate and clarify my messages as much as possible — so please forgive any odd phrasing.

                    I'm also not very experienced with using a multimeter, but I'm very motivated and ready to follow instructions carefully and report...
                    05-17-2025, 10:16 AM
                  • sam_sam_sam
                    ESR meter came to the rescue again today with a PLC I/O card fault
                    by sam_sam_sam
                    I have been having a fun time at work with two pieces of equipment that had shorted components or shorted component cables to machine frame
                    I would check what my multi meter was telling me about how many ohms I getting with the multi meter was telling versus the ESR was telling me about weather or not it really was a short to machine ground or not

                    One note at first we thought that it might be a bad I/O card or a malfunction PLC including me as well but I thought I would try and see if removing the I/O cables would make a difference or not and this time it did make a difference...
                    12-18-2023, 08:17 PM
                  • reessi
                    ACER BM320 Monitor - Horizonal Flickering Lines After a While
                    by reessi
                    Hello,

                    The monitor started off showing flickering thin (1 pixel) lines horizontally every say 3mm..

                    They are black on the right and gradually fade to nothing on the far left.
                    They start either after 5 mins or up to 2 hours after so annoying for testing.
                    They flicker continuously very fast! With a slight pause milli-second every second.

                    Initially I cleaned the LVDS cable and connected to the T-Con and then it worked fine for 3 weeks but not sure if this was just co-incidence.

                    I tested each half by removing the first the left flex from...
                    06-03-2025, 09:58 AM
                  • Biruslapio
                    Panasonic P58V11B 8 and 12 blinks error "fix"
                    by Biruslapio
                    Bought this TV used not working, panel flashed briefly on power up and it was blinking 8 times, a quick look on SS board revealed a common fault on the 3uF 250V capacitors, C201 to C205 (C1620X in the service manual), the solder joints were all cracked, C201 and C205 pins were darkened and some sparking had occurred on them, C201 was split open and clearly overheated in its last hours, replaced that one and resoldered the others, 8 blinks fixed.

                    Also the previous owner broke the antenna connector by taking the TV out of the wall mount forgetting to unplug it, I desoldered the tuner...
                    04-13-2021, 07:13 AM
                  • Loading...
                  • No more items.
                  Working...