Luxor LUX-40-914 TVB Flashing LED

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • NetStorm
    New Member
    • Oct 2014
    • 8
    • United Kingdom
    #1

    Luxor LUX-40-914 TVB Flashing LED

    hello everybody. I wonder if you could help me. I have a constantly flashing LED on the front of my Luxor. The service manual says that this can be a short and to check the protect pin. I have done this and have 3 volts on the pin so which is what it should be, so seems that there is no short.

    The power board and Tcon board have both been replaced, correct voltages seem present on the main board. I read elsewhere that this could also be a firmware problem, does anyone have any ideas on how I should proceed please.
    Attached Files
    Last edited by NetStorm; 10-26-2014, 12:04 PM.
    Tags: None
    • NetStorm
      New Member
      • Oct 2014
      • 8
      • United Kingdom
      #2
      Re: Luxor LUX-40-914 TVB Flashing LED

      Anyone any ideas?

        Comment

        • Andrew F. Ali
          Badcaps Legend
          • Jan 2014
          • 2450
          • Trinidad & Tobago
          #3
          Re: Luxor LUX-40-914 TVB Flashing LED

          Please post a copy of the Service Manual and pics of all the boards front and back, please.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              ORIGINAL POWER SUPPLY BOARD
              7 Photos
              11-22-2024, 01:46 PM
            • m1ch43lzm
              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
              by m1ch43lzm
              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
              05-12-2025, 08:37 PM
            • H34TO
              ITE IT8390 (IT8390E-256) programmer "ITE Download Board 4" user manual + firmware, flashing ITE ECs on the cheap
              by H34TO
              Recently I've gotten into EC flashing due to my broken laptop(s) and started frantically searching methods for flashing the IT5571E-128 chip on the cheap(due to me beaing a student and not having a job) and noticed that ITE newer chips can be flashed via ISP (In-System Programming) either via SMBus or the KBC (EPP - Enhanced Parallel Port) interface. While these can be achieved with programmers like SVOD4/3 or the RT809H/F those options are WAYYY out of my budget so I was horrified. But recently I stumbled uppon some programmers on aliexpress that claim they can program a variety of ITE chips...
              06-17-2025, 07:17 AM
            • duwane
              MacBook Air A2337 - 820-02016 - Stuck at 5v - Varying current draw - Board had short
              by duwane
              Hi All.

              I have an 820-02016 board (A2337 M1) that has come in for data recovery. Reported as liquid damage, but no visible evidence of any liquid damage.

              Board was initially stuck at 5v, and current only spiking occasionally to around 400mA and cycling.

              After initial troubleshooting, found that C7800 (which feeds the power rail PP5V_BSTLQ_VOUT_SPMU) was dead short to ground.

              Replaced C7800 and short gone. Board still stuck at 5v. Current draw behaviour changed. It now spikes up for a second to around 100mA to 130mA, then drops down to...
              10-17-2023, 07:48 PM
            • sfernandes
              Sega Dreamcast NTSC-U Revision 0 Launch Unit GD ROM PCB Board Short
              by sfernandes
              Hi everyone,

              Symptom: When I press the power button the power LED lights up for a second and the fan etc spins for a second then the unit turns itself off and will not do the same thing again unless I unplug the power cable for a few minutes then plug it back in otherwise if I just turn the power switch off and back on right after it comes on for a second it will not come on again unless like I said unplug the power cord for a few minutes then plug it back in.

              What I have done to try to isolate the issue so far:

              The system powers on and stays on with...
              01-23-2023, 06:03 PM
            • Loading...
            • No more items.
            Working...