Philips 47PFL8404 intermittent inverter

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PowerAmpFreak
    Badcaps Veteran
    • Feb 2010
    • 982
    • Sweden

    #1

    Philips 47PFL8404 intermittent inverter

    Dear all
    Philips LCD model 47PFL8404 had a blown high voltage cap across the inverter transformer output (33pF 6kV). Replaced and inverter operates.
    Unfortunately it won't operate continously. It stops after 1 minute to 1 hour.
    Is there a modification or service bulletin available to fix this?
    I have measured the other 2 HV caps and they are spot on value.
    Perhaps they have intermittent shorts?
    What does the expert panel say?
    Attached Files
  • PowerAmpFreak
    Badcaps Veteran
    • Feb 2010
    • 982
    • Sweden

    #2
    Re: Philips 47PFL8404 intermittent inverter

    Anyone?
    Replace entire PSU/Inverter?

    Comment

    Related Topics

    Collapse

    • fanaticgames
      Philips 43PUS6703/12 screen flickering intermittent
      by fanaticgames
      Hi guys,

      I have this philips with this defect, I tried cleaning the flats of the t con but nothing changes, is the screen the problem??

      https://streamable.com/0zl6y3
      01-05-2023, 09:19 AM
    • x_orange90_x
      Vizio E55-E1 bad backlights or bad inverter?
      by x_orange90_x
      I just got this tv today and it appeared to have no backlight on. After taking off the rear cover and checking again in the dark I can see that MAYBE one quadrant is lit.. But still it's quite dim. I was going to check the LEDs with my tester, and I found LED 1 and LED 2 + pins on the wire from the inverter, but I couldn't identify a ground. Nonetheless I tried using a mounting screw on the inverter board and also the chassis as ground but regardless my tester reads 300 which is what it reads when there is no voltage draw.

      I don't know how exactly to test the inverter itself. Is it...
      01-29-2025, 09:24 PM
    • protocold
      MacBook Pro 15" 2010 820-2850 intermittent charging
      by protocold
      I would like to get some help on a 820-2850 logic board with intermittent charging problem. Sometimes the battery will charge all the way and sometimes magsafe would be cycling between green and orange.

      I have already tried replacing dc-in board, swapping good battery, swapping genuine 85w chargers. None of that helps..

      when it is not intermittent:
      PPVBAT_G3H_CHGR_R is 12.07v

      when it is intermittent:
      When the light is green, PPVBAT_G3H_CHGR_R is 12.99v
      when the light is orange, PPVBAT_G3H_CHGR_R is 11.62v

      data line on the battery...
      07-25-2025, 08:18 PM
    • G33RT
      Philips 8200 series 65PUS8204/12 stuck at Philips Logo
      by G33RT
      Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.

      It does power up when pressing the power button.

      I already try the power button while plugin the plug with no result.
      Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.

      Could this be an PSU or eMMC issue ?
      07-19-2025, 03:43 AM
    • Gentian
      APSINT3636VR 3600W APS INT Series 36V DC 230V AC Inverter/Charger schematic
      by Gentian
      I have a tripp-lite aspint 3636vr inverter charger which blow some of mosfet transistors. I replaced them repaired also the driver circuit and tested but the mosfets burn again.

      It work very well as inverter and also as charger if I let the rear switch in auto mode (inverter) and charger only(charging) but in auto when I connect the feed line 220V AC first time it pass ok to line and start charging the batteries but when I remove the feed line it pass to inverter mode and if I do it again the second time when passing from charging to inverter the Main transformer start making a...
      03-06-2023, 07:07 AM
    • Loading...
    • No more items.
    Working...