SONY KD 55XD8005

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • YellowJacket
    Senior Member
    • Dec 2020
    • 107
    • Slovakia
    #1

    SONY KD 55XD8005

    Hi friends,
    i would like to ask for a little help, with SONY KD 55XD8005. This TV suddenly stopped working during playing. I figured out, there is 95% chance, the eMMC memory is corrupted ( based on some yt videos with similar models and some voltage measurements around the eMMC ). I have no programmer for such a memory. Is there anyone on the forum, who can program and sell the programmed eMMC for this board?. I would rather fix the original board, than buy a new one.

    Just for information:
    - the TV is dead, no reaction either to remote, or to power button on the TV
    - all voltages are present on the mainboard (also on the pwrbtn)
    - board number = 1-980-837-11
    - eMMC = KLMAG1JENB-B041

    Thank you.
    Tags: None
    • Davi.p
      Hobbist Tech
      • Sep 2009
      • 4533
      • Italy - Milan
      #2
      Could be something else, some bga balls passed away.. try to press down cpu or ram or emmc then plugging the power cord and turn.on

        Comment

        • YellowJacket
          Senior Member
          • Dec 2020
          • 107
          • Slovakia
          #3
          Well, it didn't help. I bet, it is eMMC. Looks like it is well known SONY issue:

          https://youtu.be/tP3oUCX2ID0?si=4pi8bZSplX9iprlV
          https://www.youtube.com/watch?v=Y00I6rx70j0

          So my question from the first post remains.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Tynan Dill
              Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
              by Tynan Dill
              I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

              Upon bringing it home and plugging it up, it showed a standby light.

              I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

              The screen seems to blackout and stay black, but with a flashlight I can see the display.

              With my Playstation 4 connected via HDMI, and running a game I can hear sound.

              Assuming...
              ORIGINAL POWER SUPPLY BOARD
              7 Photos
              11-22-2024, 01:46 PM
            • m1ch43lzm
              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
              by m1ch43lzm
              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
              05-12-2025, 08:37 PM
            • jb_Bak
              Sony xbr-65x900c main board issues?
              by jb_Bak
              Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

              Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
              Power Board Connector that goes to Main board
              CN6401
              Pin 01 NC
              Pin 02 NC
              Pin 03 "BL_ON": 0V
              Pin 04 "N/C"
              Pin 05 "STBY 3.3V": 3.5V
              Pin 06 "GND": N/C
              Pin 07 "AC_OFF"...
              09-27-2021, 04:52 PM
            • howardc64
              TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
              by howardc64
              All left and right refers to looking from rear of TV (or looking from front with TV upside down)
              • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
              • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
              ...
              07-24-2025, 05:17 PM
            • delpiero3
              Sony Vaio SVS MBX-261 board failure
              by delpiero3
              Hi everyone, newcomer in this forum, i watched tons of video from Sorin, i like the way i calmly explain things, i did quite some console repair, i am not that bad at micro-soldering, but troubleshooting where the issue is, is definitely where i still have progress to make. Usually i was able to fix the console because the failure was obvious, or because i was able to find someone with similar measures on the board and was pinpointing what to replace that way.
              Nevertheless, let's say, i don't come as a total beginner.
              I have this old laptop, which suit perfectly my needs, with the...
              10-29-2024, 06:16 AM
            • Loading...
            • No more items.
            Working...