UE46D8000 line down left hand side

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • SuctionFlea
    New Member
    • Aug 2014
    • 3
    • England
    #1

    UE46D8000 line down left hand side

    My TV has had this problem for a couple of months. I seems to get worse the longer the TV is on although only ever gets to a maximum or 4-5mm from the edge. Has anyone seen anything like this before and any idea if it is fixable.

    What would be part of a circle on the left bleeds up the screen and some of the colour in the background is missing.


    You can see the picture is shifted slightly up and the red background has lost some colour
    Tags: None
    • tom66
      EVs Rule
      • Apr 2011
      • 32560
      • UK
      #2
      Re: UE46D8000 line down left hand side

      Looks like another Samsung D-series panel fault... not fixable sorry.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • SuctionFlea
          New Member
          • Aug 2014
          • 3
          • England
          #3
          Re: UE46D8000 line down left hand side

          Thanks for your quick reply.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Gjackson
              SMEG induction cooker error EA on both left hand side cooktops
              by Gjackson
              Hi all,

              I have a SMEG cooktop with a EGO 72.08041.002 power board. The two left hand side cooktops started to slowly fail, sometimes stopping with an EA error (Power board failure according to the manual) after a couple minutes boiling some water and eventually they completely failed and now get an EA error on both of them at all times. Visual inspection of the board went over ok, I checked the IGBT's and rectifiers and they seem fine, what should I look at next as this is the first time I'm fixing an induction cooker, I'm suspecting capacitors in this case, Which ones should I look...
              07-09-2024, 01:46 PM
            • howardc64
              A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
              by howardc64
              Problem

              This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
              08-04-2024, 10:36 PM
            • Stephen
              A2442 MacBook Pro 14" Two Left SIDE USB C ports charge but no data
              by Stephen
              Right SIDE usb.c port charges and transfers data without issue, two left side uSB c ports charge but do not receive or see data. Was liquid damaged, and repaired significantly and thought we were in the clear but appears this is the last issue that is rearing its head. I am trying to locate the RETIMER chip that communicates the DATA TX/RX but I cannot seem to find it on the schematic or maybe I am just so tired my eyes wore out lol. Any help would be great.
              05-29-2025, 10:35 AM
            • howardc64
              Samsung QN75Q6FNA backlight no display, red LED blink 2x, fault in panel
              by howardc64
              • Prior owner tried a replacement main board. No difference.
              • Samsung 2x red blinking standby LED = panel fault
              • Jumpered FB_TRDY_1 (pin 1 CN1300 left. main tcon->left side buffer boards) and FB_TRDY_3 (pin 95 CN1301 right. main tcon->right side buffer boards) This allows testing individual T-Con (on main board) connection to panel on this Samsung. Found fault on left side (viewing from rear of TV)
              • Each side has 2 buffer boards, disconnected left side flex between 2 buffer boards. Fault is on the left most board.
              • Tape masking eventually isolated to CN1300 pin 15 (CKV4_GOA) Display
              ...
              07-19-2025, 10:54 PM
            • ravi_1617
              HCL Laptop SCREEN SIZE SHRINK LEFT SIDE AROUND 2 INCHES
              by ravi_1617
              Hello to all ,
              I have this HCL ME LAPTOP K 41 ,screen image is shrieked clock /speaker left side approx. 2 inches .Its 14.1 LCD SCREEN. I have replaced lcd screen ,found no difference
              Its blank that area blank and bottom of Task bar is rolled at bottom displaying top portion image . In bios /setup also getting same problem
              on external VGA port image is perfect /normal , Attached image...
              07-25-2025, 12:07 AM
            • Loading...
            • No more items.
            Working...