Repair Philips 55PFL8007K/12
Hi there, first things first i must say i'm new in electrican things so take me easy here. I got a TV not a long ago and i wanna repair it. Everyone said the TV doesn't even start untill i got it, i started it and the TV was functional for about 10-15m and that was it, it stopped. The LED light sometimes blinks twice while it's plugged in, sometimes doesn't start at all. Just tell me what to do and i'll reply anytime i can.
-
-
it's the common problem for that series, the cpu balls needs to be replaced, someone solved for unknown time with a good reflow..
-
Connect the SDM connector to ground and plug the TV into the power outlet. How many times does the LED flash?
If 5x and 3x ( = layer 2 error 53 ) then reball the processor as Davi.P said.Comment
-
You have to solder a thin wire on SDM testpoint on main board, the other side to a negative of an electrolitic cap , power the tv, if it gives code 53 by blinks so it is as i said..Comment
-
That kit was for a 7008 and not for the 8007. All kits are sold out and will never be available again unfortunately.Comment
-
sorry i entered the wrong threadComment
-
Philips 8200 series 65PUS8204/12 stuck at Philips Logo, it does not reboot it just stays on the logo.
It does power up when pressing the power button.
I already try the power button while plugin the plug with no result.
Also put the latest firmware autorun-TPM191E_R.001.004.100.000.upg on a MBR/FAT32 USB stick at USB port2 with no result either.
Could this be an PSU or eMMC issue ? -
Hi all,
Wife has 2 Philips hair curling irons half defective - after learning how they're supposed to work and testing them, it turned out that both have defective power cables, and both on the same place; broken wires due to wire bending.
As they were both relatively easy to disassemble, and cables are plugged not soldered (as they can rotate in the handle), I was sure it would be easy to find replacements. But - NO! I'm unable to find anything similar on ebay or Aliexpress.
Not sure if this is something Philips proprietary, or a standard, but the cable plug... -
Hi
I have here a Philips 47PFS7509/12 LCD TV which came to me with a weird problem : without signal i could access menu, make a factory reset, access menus, etc.
When i applied cable signal to check image, i had normal picture, but TV was restarting.
I downloaded original firmware and applied the update, but the problem remained.
From a colleague i received a "factory package software" which is a lot bigger.
I made another firmware update, but still did not solve the problem.
Somewhere on the way the error got worse, because at the moment the... -
Hello,
I've got a really strange issue with the speakers on my Philips 43PUS7506/12. It makes this awful loud buzzing now. It happened after it was attempted to be wall mounted - I think the back got squeezed and something broke.
I thought maybe the speakers got damaged, so I replaced them - no dice.- Using the internal speakers, it always happens.
- Using the headphone jack, it never happens.
- Using the digital/optical out with a soundbar - it happens after about 2h/movie runtime - it's never as drastic, it just pops in and out, but I didn't want it to damage the sound bar
-
Hello Team,
New issue on LCD panel where I need to find out the cause and the potential solution.
This is on the Philips 50PUH6400, the LCD panel is an INNOLUX V500dk2 xrs1.
I have image, on the right side, the image is more or less normal even if there is a small blur on edge, on the left there is an issue.
When moving up and down in the menu on the right the image is slow to disappear, and is darker, like red/brown.
I've checked voltages, no issue found comparing right and left side of the panel driver.
VHG VGL CKV... are the sames on...
Comment