Announcement

Collapse
No announcement yet.

Vizio XVT473SV Power On problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Vizio XVT473SV Power On problem

    Unit 'V' led flashes Orange, then White, Vizio Logo appears on screen momentarily, then shuts down .
    Main board?

    #2
    Re: Vizio XVT473SV Power On problem

    This series is very tough. I have one same problem. Change main It run one day and do the same.

    Comment


      #3
      Re: Vizio XVT473SV Power On problem

      i HAVE ONE WITH NO +18V. NO +12V, ONLY HAS +5V ON PS. Help please. John

      Comment


        #4
        Re: Vizio XVT473SV Power On problem

        Originally posted by tvtek View Post
        i HAVE ONE WITH NO +18V. NO +12V, ONLY HAS +5V ON PS. Help please. John
        Same TV model?
        Please upload good clear pictures of the backside of the TV so we can see how all the boards are connected together.
        Your problem sounds like the main board is not sending the PS-ON to turn on the rest of the power supply circuits.
        Never stop learning
        Basic LCD TV and Monitor troubleshooting guides.
        http://www.badcaps.net/forum/showthr...956#post305956

        Voltage Regulator (LDO) testing:
        http://www.badcaps.net/forum/showthr...999#post300999

        Inverter testing using old CFL:
        http://www.badcaps.net/forum/showthr...er+testing+cfl

        Tear down pictures : Hit the ">" Show Albums and stories" on the left side
        http://s807.photobucket.com/user/budm/library/

        TV Factory reset codes listing:
        http://www.badcaps.net/forum/showthread.php?t=24809

        Comment


          #5
          Re: Vizio XVT473SV Power On problem

          This main board XVT473SV, along with M470nv, m550nv and XVT553SV all seen to fail from bad firmware and HDMI chip going bad.

          The HYNIX H27UAG8TMTR (2GB) which hold the firmware develop bad block over time and need to be reprogram to correct this bad data.
          Last edited by ecking767; 09-10-2015, 11:33 AM.

          Comment

          Working...