Re: Please upload pictures using attachment function when ask for help on the repair
Another example:
https://www.badcaps.net/forum/showpo...5&postcount=35
-
Re: Please upload pictures using attachment function when ask for help on the repair
What can be done with good pictures:
https://www.badcaps.net/forum/showpo...9&postcount=12
https://www.badcaps.net/forum/showthread.php?t=41310Leave a comment:
-
Re: Please upload pictures using attachment function when ask for help on the repair
Thanks!Leave a comment:
-
Re: Please upload pictures using attachment function when ask for help on the repair
Thread stickied, also edited OP with link to FAQ on uploading pictures.Leave a comment:
-
Re: Please upload pictures using attachment function when ask for help on the repair
Not sure if your having me on
Well maybe stickie in US?
Sticky is just a thread that is always available at the top of a forum.
On the tv section there are 4 - you can apply to a mod to have any good
useful to all thread stuck ( pinned - hence the blue tack symbol) to the top of a forum.
On the Monitor thread is retiredcaps' 2 second to black guide.
so it is easy to refer people to it.
@ retiredcaps - my dittie above is mostly copied from yours. I was thinking the 2mb could be increased to 3mb as even cheaper cameras start off there.
and the jpg up;load is now said to be 4mb not that I have tried it.Leave a comment:
-
Re: Please upload pictures using attachment function when ask for help on the repair
Are you questioning what a sticky is or the idea of using one for this purpose?
I think it's an ok idea to set a sticky post devoted to how to ask for help here. Some people (especially newbies, no offense to newbies, it just takes time to learn how things work here) need it drummed into their heads so another drum probably couldn't hurt.Leave a comment:
-
Re: Please upload pictures using attachment function when ask for help on the repair
All handheld shot with, my now 10+ year old and still going strong after 30K+ pictures, Canon A80.
Macro and sunlight are required.Last edited by retiredcaps; 08-19-2014, 01:15 PM.Leave a comment:
-
Re: Please upload pictures using attachment function when ask for help on the repair
Hmm, no animated gif for :standing-on-chair-clapping:
Although I no longer participate in certain sub-sections of these forums, sometimes I lurk and despite providing numerous well written easy-to-understand examples, tips, guides, it still amazes me that people asking for free help to solve their problems still can't or won't do the simple basics.
I suggest putting this thread into your signature link as well.Leave a comment:
-
Re: Please upload pictures using attachment function when ask for help on the repair
Sticky?Leave a comment:
-
Re: Please upload pictures using attachment function when ask for help on the repair
I second and third that !
Cant understand why when people can see what we keep asking for so few
bother to put together a decent request for help.
Perhaps we need to have some minimum requirements on a sticky we can just
post as a link in reply to an inadequate request.
I used to post this but gave up.
Welcome to the forum-
We can help a lot more if you please post good clear pictures of the whole chassis, and then pictures of each board, front and back (in the same orientation) and close up of connectors, (max resolution 2000x2000 and 2MB) using the manage attachments button, which is found by clicking "go advanced" under quick reply.
Please do not post inline and offsite as they slow down the loading of pages.
Examples of what is needed
https://www.badcaps.net/forum/attach...7&d=1280167246
https://www.badcaps.net/forum/attach...6&d=1280167246
https://www.badcaps.net/forum/attach...4&d=1280167246
It will be useful if you can say what the supposed fault was and a bit about yourself - skills tools etc.Leave a comment:
-
Please upload pictures using attachment function when ask for help on the repair
If you do that it will help us a lot, it is not easy trying to troubleshooting without having the units or the boards in front of us to look at, it is the least you can do for us that are trying to help.
Also look at the pictures you take, if you cannot see the object clearly, we cannot see it clearly either. I have to draw up the diagram based on your pictures when we do not have the service manuals for what we are trying to fix.
I am getting tire of asking for pictures so I skip those posts without pictures.
Here is a link to our FAQ explaining how to upload pictures incase you need it: https://www.badcaps.net/forum/showthread.php?t=1868
-
This is a new item at Electronic GoldMine that has arrived within the last few weeks
Here is the link for them I know for sure that it works because ( I tried it on mine soldering station ) I bought two of them and I just bought two more of them so I have some extra replacement ones in my parts bin
Stahl Tools DDDS Replacement Iron for DSDS Stahl Solder Station
https://theelectronicgoldmine.com/products/g28392
One note it will not work for the ZD-917 or similar model number that does not have the sleep function that are the same iron but the plug only...11-24-2024, 01:25 AM -
Hello everyone, I'm troubleshooting an MSI Delta 15 (MS-15CK1) motherboard, and I need help identifying the function of the two coils marked in the attached image. The laptop powers on and responds to the keyboard, but the screen does not turn on-neither the LCD nor the backlight. I've checked the main power rails, and all other coils seem to have the expected voltages:
• 0.91V for the GPU
• 1.7V for VRAM
• 3.3V and 5V rails 1.8V for the BIOS
• 0.9V for the CPU and iGPU 1.2V for the RAM
However, these two coils are not showing any voltage.... -
Hi it looks like everything works don't know where to test except the 390v in the 2 capacitor in the hot side of the power supply and the weird 180v in the diodes in the cold side that should be discharged it is writin on the circuit no more you can read what is written on the circuit quite srrange color mixiing yellow and white
anyhow i couldn't t read anything else
the backlight is on strong and the screen does not get dark or very dark but no pictures
the mainborad feels a bit hott on the black part i test it to 52 degree's against 34 to 40 on the rest of it
... -
The 55" LG has been in the basement for a few months without being used. Turned it on yesterday, set came on as it should and showed a complete screen for about 5 seconds (was on a broadcast channel but no antenna was connected), then the screen went mostly dark with about 1/3 of the screen on the right lighting up with brighter lines in that lit part (sorry, no pictures of that). Power LED was cycling too, preventing the TV from fully powering up.
Pulled the back off, all boards looked OK. Pulled the LED connector, turned the set on to see if it would power up but I don't belive it... -
I do hope I have posted this in the correct area, as it is a video related device?
The above item has reached end of life, with the manufacturer not supporting this any longer
My unit has stopped, in that it will start up, however, it will not respond to the remote control.
My remote seems to work ok, as I can see it emitting a red led when I use a mobile camera to check it....just to be sure, I also have a Harmony remote 300 that I was able to download the codes onto, and it's behaviour is the same.
Previously, pressing the remote invoked a...
Leave a comment: