Hello, I need the full .bin emmc dump of this TV. How can I find it? Thanks.
-
Hello everyone,
The TV won't turn on (no power, no LED,). All voltages are present on the motherboard. The CPU is working and is getting warm.
This is a common issue with this model. If the eMMC is faulty, the TV will either go into a reboot loop or not turn on at all.
does anyone have the EMMC dump file?
Model: Sony KDL-55W805C
Mainboard: 1-980-805-31
EMMC: SK HYNIX H26M52103FMR
Display-Panel: T550HVF06.0 -
This laptop is the same laptop I was working on in this thread and I wasn't sure if I should post a new topic or post in that thread because I already solved the issue that thread was discussing and this is a completely different issue although it is dealing with the same laptop. I decided to make a new thread since it's a new issue, but please move if I made a mistake.
Motherboard model number: DA0PAMB46A1 REV: A
Secondary motherboard model number: 0PAB
SKU: 685K4UA
Serial number is: 5CD3223BJP
Recently reflashed this laptop with latest BIOS and once... -
Asus X512FF (X512FLC) REV 3.1
Help to find the KBC dump for this model.
The laptop works. but there is a problem, after power off it no longer responds to the power button, that is, you have to reset the battery and it turns on again (autostart).
There is also no keyboard backlight and the touchpad does not work.
The multicontroller is responsible for controlling these functions. Before I replace it, I would like to flash it first. thank you
Attached is a picture of the sticker and the native dump.... -
Need emmc dump for XBR-65X850D or for 55” version, board number is 1-980-832-11, this is USA board and Europe and UK board has same board number but board is slightly different and the dump didn’t work so really need the correct one, I don’t mind looking after the person with the dump...01-17-2024, 11:40 AM -
I am extremely new to programming and dipping into this. I picked up a XGECU T48 Programmer and have the correct socket for EMMC.
I took the EMMC off a working main board with no problems and threw it into the programmer. I click analysis IC and it gives me a report (attached) of the current EMMC. Model H26M41204HPR
1) I manually found this chip(above model number) in the select IC section of the XGPRO 12.xx programmer software and it had a option for 4 bit and 1 bit. I chose 4... is this correct?
2) In the options section point number 2 operation says "30...