Does anyone know if I can use an sc2 board in place of an sc1? I have a tc-p50s30 with the 7 blink error code. I purchased a new sc board and received and sc2. The tv had an sc1. I installed the board and am still receiving the 7 blinks. I have ordered new su and sd buffer boards. I'm wondering how I may be able to test sc2 compatability. Any help would be greatly appreciated thank you much
-
-
Re: Panasonic tc-p 50s30 sc2 sc1?
Check Q422,Q423 etc... might have received a broken board,this model it's almost ALWAYS a blown SC,due to screws not tight enough)...sc1 or sc2 as far as I know don't make a difference..
shopjimmy has a repair kit:
http://www.shopjimmy.com/panasonic-t...-tc-p50s30.htmLast edited by martino; 08-05-2014, 06:40 PM.Proud owner of dozens of broken TV's and many,many,many boards.
Our website and passion:http://hollenhundshepherds.com/ -
Re: Panasonic tc-p 50s30 sc2 sc1?
Thank you much I will check that and see were it goes. Really appreciated, thank youComment
-
Re: Panasonic tc-p 50s30 sc2 sc1?
correct board should be TXNSC1MNUX (TNPA5351AM), should be on a white stickerComment
-
Re: Panasonic tc-p 50s30 sc2 sc1?
Yes on the sticker it is a 5351am. I was still receiving the 7 blink error code so I am installing the new sad/su boardsComment
-
Re: Panasonic tc-p 50s30 sc2 sc1?
Everything worked out well. I replaced my sc1 board with an sc2, still got the 7 blinks. I then replaced the sd/su boards with the ag boards with heat sinks. TV is working well, thanks for the replies and the help
SALUTE!Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
I did not have any 27uf @ 50 volt capacitors but one nice thing is that it has enough room for two capacitors in parallel a 22uf and a 4.7uf @ 50 volts 22 plus 4.7 equals 26.7uf which so very close to 27uf I will show some pictures of it sometime tomorrow
This is one of the shit est boards I seen in a very long time and it was the daughter board the traces just lifting off the board I had to use the capacitor leads to repair the the traces and the main board is not any better because I had to repair several traces for the daughter board to the main board
After all of... -
I have a Panasonic TC-P54VT25 that will power on and prime the display but there is no image at all.
The panel is primed as there is a slight glow from the entire panel. This means the problem should be logic related. The service manual also confirms this and recommends replacing the A or the D board.
I have tried to get the TV to display the test sequence but I have been unable to and I don't even know if this TV has a test sequence or not. I tried following tom66's instructions in post #3 on this thread https://www.badcaps.net/forum/showthread.php?t=26790. There was... -
Hi everyone!
I happened several times, in the search for help from the web, to consult this very interesting forum.
So I decided to sign up and I intend to participate actively by making available my knowledge and experience on the subject, I'm a new user but at the same time I'm old in the sense that I have 4 decades of experience in repairing and designing electronics but above all I'm a great passionate about the subject.
Having said that I come to the gist of my post on the forum as the title suggests.
For my passion for technology I'm now collecting several...
Comment