PDP scan drivers datasheets or pinouts

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jbfr_54
    Senior Member
    • Dec 2012
    • 52
    • France
    #1

    PDP scan drivers datasheets or pinouts

    HI All,
    I am working on a YBuffer repair for a Samsung set (PS51D450), using AN16538A chips. One is dead.
    I already worked on another board using R2A20292BFT chips (for a PS42C450).
    They are both 96 bits scan drivers. I have some spare of the R2A20292 but none of AN16538A.
    Does anyone has the datasheets for both IC's or at least pinouts.
    I would like to kow if they can be interchanged ?
    Thanks for your help.
    Rgds. Jean
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • japlytic
      DRIVER_PNP_WATCHDOG error re. old drivers in Windows 11 install image
      by japlytic
      In a Beelink GTR mini PC, mine has an Intel AX200NGW WLAN module.

      Tried (only with keyboard/mouse connected):
      • BIOS + database update
      • Using latest Windows 11 image built with official image creation tool
      • Previous setup version for Windows 11 installer
      • Replacing SSD without a slow block (the previous SSD had a slow block with access time > 500 mS)
      • TPM reset (worked to the point where DRIVER_PNP_WATCHDOG error message is displayed briefly after the point of stalling)
      • Disabling power to WLAN and LAN modules in BIOS (Advanced > AMD PBS > PCI Express Configuration)
      ...
      06-19-2025, 04:59 PM
    • pavithra
      LC6685 based LED drivers
      by pavithra
      I have 50 Chinese constant current isolated LED drivers based on LC6685 IC. 35 drivers are working fine, but there is a slight flickering in the rest of the drivers.
      I have checked the output with oscilloscope and found that there is a slight random voltage fluctuation.
      Is it possible to get the datasheet of LC6685 IC?
      Also highly appreciate if you could let me know what could go wrong....
      1 Photo
      04-16-2024, 02:46 AM
    • kuba2102
      Alienware m15 R4 CPU or CPU drivers issue
      by kuba2102
      Hi. I had a problem with this laptop that under a load it would crash the system, meaning the screen would go black and unresponsive. I have noticed that CPU drivers surrounding area of PCB has changed colour due to high temperature. I have tried to reball the Drivers, but after it laptop wouldn't turn on at all and it would trigger over current protection in the PSU. I ordered and replaced 3 of of 5 Drivers (3 CPU, 2 IGPU?), and it started producing 1.2V again but just for a second. I get led flashing out the CPU failure code. Now I'm not sure whether there is still a problem with the drivers...
      01-04-2023, 09:05 AM
    • Ady2017
      Are there any datasheets available for Elna RJG capacitors?
      by Ady2017
      I have a 2007-era Panasonic VHS combo that is full of of Elna RJG capacitors. I am trying to test the capacitors to diagnose the machine and then select replacement capacitors but I can not find any datasheets for them. I did find a Elna catalogue from 2007-2008 but there is no mention of this capacitor series. Where these specially made for Panasonic and so not made available to the public? Any ideas what to find out what the ESR values should be without the datasheets? They are all between 10V and 50V and 47uF and 1800uF. None are leaking or bulged but I know that they need to be tested to be...
      05-25-2025, 02:19 PM
    • kotel studios
      Intel D865PERL - no Vcore after replacing MOSFETs and MOSFET drivers
      by kotel studios
      Hi,

      Finally got time to fix this board up.
      At first it didn't give any POST codes. Turns out it was an unsupported Celeron D cpu. After dropping in an Celery 2.6gHz the CPU came out of reset with clock signal, but still no post codes. For a while it did work when I applied pressure to the ADP3168 chip, but on next reboot the MOSFETs started to burn. Then I left it as is for months.

      Now I came back prepared. Replaced the bad MOSFETs and the ADPxx18k drivers. Now I don't get any MOSFETs blowing up issues anymore. But sadly, the Vcore is missing. The whole VRM isn't...
      04-22-2025, 05:08 AM
    • Loading...
    • No more items.
    Working...