hello brothers
I need a Sony KDL-40EX600 dump..
The device turns on when i click power button but no picture or sound only tv is stuck on the green light
this is the same problem but not my model
(139) متوقف على اللمبة الخضراء sony kdl-32S5600 اصلاح - YouTube
-
Peace be upon you.
Brothers, I need a dump for a Sony LCD smart TV.
Screen type and model: SONY KDL-55W805B.
Please provide a dump for the device.
The device boots up but the SONY logo doesn't appear at first and remains in this state.
-
I am in desperate need of an EEPROM dump for a Sony Trinitron KV-9AD1 (Japanese model) or its North American equivalent, the KV-8AD10.
micom - Mitsubishi M50439-715SP
jungle - Sanyo LA7655N
eeprom - OKI MSM16911RS
If anyone happens to have this specific dump file or owns one of these models and is able to perform a dump for me, it would be a huge help.
I've been searching for this for a long time, so any leads or assistance would be greatly appreciated. Thank you so much in advance!01-03-2026, 06:08 PM -
Hello! I am looking for Sony TV: KD-55X9305C, board number: BMFW, 1-894-595-12 My content is uploaded....03-18-2026, 11:09 AM -
Hello guys, can someone help me with an eMMC dump for a Sony KDL55W-955B TV, I tried to read the original memory with the RT809H but it shows me that it only has 1888MB even though it should have around 3.8GB. On a new memory it shows me 3776MB. From what I found on the Sony page, the following models could also be compatible:
KDL-65W955B, KDL-55W955B, KDL-60W855B, KDL-50W805B, KDL-42W705B, KDL-32W705B, KDL-48W605B, KDL-40W605B, KDL-60W605B, KDL-55W805B, KDL-42W805B, KDL-48W585B, KDL-32W706B, KDL-42W706B, KDL-42W815B, KDL-42W817B, KDL-50W815B, KDL-55W815B, KDL-42W828B, KDL-42W829B,... -
I recently took a dump of the 4GB EMMC dump of a new and working Panasonic main board and now the TV won't turn on.
The dump was successful and the program finished without errors.
I used a XGecu T48 to do the dump.
I actually had a few issues getting it to go and I might write up something as a bit of a guide as I couldn't find much in English to go from.
One thing I did do was connect a 1kohm resistor from the 1.2v line to the RSTN pin as per the instructions, could this have caused issues?
I also shorted out the crystal of the adjoining ECU together and at one...