Hello , I had this in the for sale section,,I'm new so i'll try here... ,I asked something similar to this in another post but not sure if that was ok or not to do so i started another post....my x32 is flashing picture but has sound . right now this is my only tv so instead of troubleshooting is there a chance that replacing one of the boards would have a 90% shot at solving the problem? thanks for any help with this.
-
-
Re: Sceptre x32 board replacement?
You need one of theseAttached Files -
-
Re: Sceptre x32 board replacement?
Count the boards inside,let's say 4 boards.....100 divided by 4 =25.....So 25% change of success without trouble shooting... (Fill in right number of boards for proper result).
Now,let's say,one board took out another board,now you need two boards.....but by only replacing one board(without trouble shooting) you now power up tv and blow up new board as well... >>fill in math for this yourself....
Compare above result and COST against doing a proper "trouble shoot" where you end up buying a board or even a few components....fill in math yourself.....Proud owner of dozens of broken TV's and many,many,many boards.
Our website and passion:http://hollenhundshepherds.com/Comment
-
Re: Sceptre x32 board replacement?
What kind of tv is this...lcd....plasma...led. plasmas have power supplys, main board, xsus main and inverters, ysus main and inverter boards, and sometimes other boards.....lcds have power, main, and t con boards....need pictures and more info to help you out....if you have sound and tv turns on, most of the time it rules out the power supply. Sounds like the main board. In lcds the video chip on the boards can make the flashing....need pics and info though to helpComment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
i have a 2020 macbook pro 13" A2251 with 820-09149 logic board so i found an issue with chip labeled U6903 according to schem. boardview using flexBV software, so i removed it from the board and the issue im having is that the chip says "07A08FI ELC180" on top of it but when searching for a replacement chip, i can find tons of identical looking chips that also have "ELC180" printed on them but the first set of digits is never the same so im trying to find out if i need this exact chip with these same numbers as mine and if not which ones are compatible as a replacement?... -
hello everyone,
I don't normally do tv repairs but this is a case with my personal TV which got fried together with many other electronics in my house after a thunderstorm.
The TV is a Philips 65PUS8518/12 which had no power. I measured and concluded that the main board was probably fried through ethernet or hdmi. I found a board with same number 715GD328-M0F-B00-005Y (I had G) but from a 55PUS8518. The TV starts but the image is doubled, distorted. I need to set the panel code which is 016 according to the sticker on the back but I can not seem to do it.
... -
Hello my friends!
I have a question that I think you can answer and help me with!
I have a faulty main board from an led TV. And I found the same part number board and design but is from a 43" TV and I want to use it on a 65". On its stickers , all are the same except the wattage for the LEDs backlight, both state different watts and LED Voltages!
So I presume that the backlight inverter section from the replacement board has lower wattage then the original one, am I right?
My concern is that the board won't draw enough voltage to the bac... -
Hi,
I try to repair this fly-back type PSU, I diagnosed (identifiable) dead N-MOS and fuse, but there are 3 smd resistors on the bottom that burned and became unreadable.
The support in charge of the brand in France managed to get me the schematics from Ecler, but it didn't include the PSU board. After a while they finally told me that the unit was too old so they don't have the PSU board schems.
I can find replacement PSU board online, but only for the Nuo 3 or 4 or 5, and it seems they ar compatible with each other, as I often find boards compatible with these...
Comment