Sanyo DP46840 Half Picture Chassis -01

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ntehicks
    Badcaps Veteran
    • Mar 2011
    • 272
    • United States
    #1

    Sanyo DP46840 Half Picture Chassis -01

    I just picked up this TV today. It is a Sanyo DP46840 Chassis P46840-01. the owner told me that when they first turn the tv on the get half a picture. and after about 30 minutes the tv will go to full picture. I wonder if some of the caps on the main board could be the trouble. I have attached some sample pictures. some of them look a little bulged at the top. not sure of this would be a t-con. but I thought it was strange that it would start working after the tv warmed up. any suggestions would be awesome. thanks for your help.
    Attached Files
    Tags: None
    • Dgtech
      E. Technician
      • Apr 2009
      • 1462
      • Steeler
      #2
      Re: Sanyo DP46840 Half Picture Chassis -01

      post pics of the other boards as well.
      The strong-minded rise to the challenge of their goals,the weak-minded BECOME HATERS

        Comment

        • johnboy1313
          Badcaps Legend
          • Nov 2012
          • 1959
          • USA
          #3
          Re: Sanyo DP46840 Half Picture Chassis -01

          Those caps look fine. You might have an inverter going bad. You also might have a bad panel. I have a DP46848 that has half a picture until it warms up. It has bad tab bonds. Flexing the chasis gets the picture to come and go.

            Comment

            • ntehicks
              Badcaps Veteran
              • Mar 2011
              • 272
              • United States
              #4
              Re: Sanyo DP46840 Half Picture Chassis -01

              I found that the bonding tab to the screen is not making a good connection. I found a video out on you tube with this exact model of TV. And Wow it was easy to get to this spot. I wish all of the TV were made like this. I added a piece of foam and now the picture stays full all of the time. thanks for your help.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • charlesdutcher
                  No picture issue in Philips Chassis FTL2.1
                  by charlesdutcher
                  Hello,
                  My Plasma Philips 37inch chassis FTL2.1 does not show picture. It automatically goes into protection mode after 30 seconds (red led blinks at 3Hz)


                  Is there someone having any symptom like this? How to fix it?

                  Thanks in advance!​
                  08-06-2024, 09:55 PM
                • Fly_Among_Stars
                  VIZIO E70-E3 Half picture with half TCON
                  by Fly_Among_Stars
                  Hi,
                  I have a VIZIO E70-E3.
                  Symptoms: Black screen, no picture, but LED backlights are working.
                  I probed the power board and voltages are as listed on the board.
                  Main board appears fine, too.
                  I believe the problem is either a bad T-CON board, or connection to LCD, or bad LCD.
                  There are two separate ribbon cables feeding the LCD.
                  If both are connected, the screen is black.

                  If only the ribbon cable that feeds the right side of the screen (when viewed from the front) is disconnected, the left side of the screen shows picture and...
                  04-24-2023, 08:20 PM
                • gavric
                  Vizio M70-C3 Half picture is bad, main board on its last leg?
                  by gavric
                  Hello, i am working on Vizio M70-C3. It can hardly power on, it takes 15 power button presses or remote. Seems like eeprom problem that I seen before but all reading online says that this tv has power board or main board problem.

                  When tv powers on vizio V logo shows nice on whole screen. picture 1
                  When it goes into tv mode it only shows good picture on left side of screen, right is all scrabbled up. pic 2
                  When i start youtube picture shows on left side fine, right is all scrambled. pic 2
                  When i click video to start playing picture goes black(like when you change...
                  09-02-2021, 08:55 PM
                • JJAAMM
                  SAMSUNG UN55KS9000F picture fades then distorts into vertical lines after 20 seconds
                  by JJAAMM
                  This was my main TV for the last 6 years. I'm not inclined to throw out a $2600 TV so quickly so I'm trying to investigate the issue.

                  Problem
                  TV was disconnected from power for 6 months during construction. When I plugged it yesterday picture was fine, after 30 seconds it dimmed then started developing horizontal lines, picture then starts to ghost vertically until it degrades into vertical streaks. TV always displays a perfect picture when cold. I can unplug TV for 5 minutes and plug it back in and picture is restored for 20 seconds. I can also keep it in standby mode...
                  07-06-2023, 06:01 AM
                • TR103
                  Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                  by TR103
                  Hi, I have a Samsung UE50TU with:
                  - sound and backlight, but no picture
                  - when it arrived, it had a picture for a few seconds
                  - it keeps rebooting
                  - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                  - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                  - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                  - without cable between mainboard and lcd panel and with a jumpered...
                  01-22-2025, 04:12 PM
                • Loading...
                • No more items.
                Working...