Sharp LC-40E77UN turns off bad IC detected

icekillah

Senior Member

Join Date: May 2014

Posts: 55

Country: United States
#21

10-22-2017, 10:35 AM

Re: Sharp LC-40E77UN turns off bad IC detected

I gave up on this one, as the mainboard was used in different models and had special firmware that varied from model to model. One free thing you can try is to put your mainboard in a freezer for 10 minutes, I know it sounds crazy but it has worked for me in the past
Comment

Previous 1 2 template Next

Sharp CC-60LE640U - after mainboard replacement, backlite turns on -- but cannot update firmware / see menu

by AustinComputerDoctor

Hello,

I am looking / wondering if anyone knows where a good firmware download link is for a LC-60LE640U, the sharp support sight says the screen is archived but offers no links.

I see backlite is active,

but I cannot get the screen to return back to menus , etc

This is all after replacing the mainboard...

any assistance is greatly appreciated.
- Channel: Troubleshooting TVs and Video Sources
03-25-2024, 12:43 PM
ASUS ROG G513QY – RX 6800M powered but not detected intermittently + random crashes (Motherboard: 6050A3254002-MB-Axx)

by EvazX

Hello everyone,

I am working on an ASUS ROG G513QY laptop with RX 6800M dGPU.
Originally, this laptop was completely non-functional. I replaced the motherboard (part number 6050A3254002-MB-Axx), and with the replacement board it started working fine.

For a long time, the dGPU worked perfectly stable. I played several hundred hours on very demanding games such as Cyberpunk 2077 without any crashes, instability, or detection issues. Performance was excellent and there were no warning signs of failure.

However, after some time, the replacement motherboard...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
08-25-2025, 06:09 PM
Sharp PN-LE701 turns itself on

by TVnovice2

I have a PN-LE701 that turns itself back on almost exactly 65 seconds after being turned off. I have done a hard reset, factory reset and updated the firmware by USB, all to no avail. I called Sharp and they said they have experienced this quite a few times and just replaced the main board. Once, a factory reset corrected the problem but only once. Any help appreciated.
- Channel: Troubleshooting TVs and Video Sources
10-13-2022, 09:34 AM
MacBook Pro 14" M1 Pro Turns on functions then turns off when I plug in USB C cable

by Stephen

MacBook Pro 14" M1 Pro Turns on functions then turns off when I plug in USB C cable to reset the computer. I disconnect the battery fully and then reconnect it and it won't turn back on. After letting it sit for a day I plug the battery back up, and the MagSafe 3 cable and it powers on and stays ons, once I plug in a USB C cable into the port closes to the MagSafe port it turns off and the Amber light turns off and won't turn on. No water damage, nothing, I want to do a DFU restore to wipe the computer since the customer stated they did an update and ever since it just decided to not work...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
03-15-2024, 09:37 AM
Sharp 40BJ3K - Backlight immediately dims and turns off.

by stav242

Model : Sharp 40" 4K LED 40BJ3K with TP.MS6586.PC710 single board.

Fault: Turning on TV, the backlights come on then immediately start dimming down and turns off.

Checks:
Standby LED voltage starts at 46v
checked all LEDs, all test good.
Checked caps, diodes and most for shorts.
Nothing obvious.

(Edit)
Ok so since getting the board out to photo, and testing all components in place (as a first pass). I reinstalled the board ,reseating all connections to the PCB... And the backlight is now working...
...
- Channel: Troubleshooting TVs and Video Sources
01-04-2022, 05:27 AM
Loading...
No more items.

Sharp LC-40E77UN turns off bad IC detected

Comment

Related Topics