Pioneer Kuro PDP-LX5090 7 blinks intermittent

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK

    #1

    Pioneer Kuro PDP-LX5090 7 blinks intermittent

    I am picking this up. I'm paying a lot of money, way more than usual (£225) but I think it is worth it given it is a 9G Kuro. 50" 1080p. The "Best" TV ever made only beaten by the 9.5G Kuro before Pio gave up the ghost. No TV has ever matched Kuro contrast, black level or brightness. It will most definitely be going up on my wall. I cannot sell this!!

    Anyway, I am just wondering if anyone knows much about the 8 blinks of death on these. IIC comm fault. It's intermittent, the set will power up now and then. I'm thinking there's a good chance it's a bad linear regulator, as the IIC (I2C, eye-squared-cee) bus is powered by a 5V->3.3V linear regulator. I've seen someone do a PRO-series Kuro (I think that's 9.5G) with the same fault. Would be nice.

    Sorry PZ80, you will be ousted by this Kuro!

    Pure plasma pornography...
    Last edited by tom66; 06-01-2014, 05:04 AM.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.
  • tw2005
    Badcaps Legend
    • Oct 2011
    • 6458
    • Australia

    #2
    Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

    Comment

    • audiofreak19
      Badcaps Veteran
      • Apr 2013
      • 556
      • usa

      #3
      Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

      After doing a little research. Someone else had the same issue and eventually stopped turning on completely. They replaced the audio input board and it corrected their issue. So I would look for faults there first.

      Comment

      • tom66
        EVs Rule
        • Apr 2011
        • 32560
        • UK

        #4
        Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

        Funny, seller is giving me an IO_AUDIO board that was ordered for this fault but never installed. I think that's the same board and the I2C bus does cross mostly onto that board.

        That would be the world's easiest repair. Not quite, I think the loose LVDS on the 46" PZ80 was easiest. But I still want to figure out exactly what the fault is...
        Last edited by tom66; 06-01-2014, 05:24 AM.
        Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
        For service manual, schematic, boardview (board view), datasheet, cad - use our search.

        Comment

        • audiofreak19
          Badcaps Veteran
          • Apr 2013
          • 556
          • usa

          #5
          Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

          Wow that would be awesome. Post a picture of it when u get it. I have never seen or heard of that tv

          Comment

          • tom66
            EVs Rule
            • Apr 2011
            • 32560
            • UK

            #6
            Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

            I don't think a photo can even attempt to capture how good these panels look, especially if properly calibrated. I've seen one in person a few years back at a friend's house (it might have been an 8G, I'm not sure, but it was a Kuro), but didn't think much then. Wasn't really fascinated with TV tech like I am now...
            Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
            For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • audiofreak19
              Badcaps Veteran
              • Apr 2013
              • 556
              • usa

              #7
              Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

              Very true. What year is that from. Does it have the double glass plasma screen. I haven't swapped my panasonic plasma with any of the tv's I have fixed yet because of that strong screen. I have accidentally thrown a poker chip at it and it did t even scratch it. Cause with kids screen protection is my major worry.

              Comment

              • tom66
                EVs Rule
                • Apr 2011
                • 32560
                • UK

                #8
                Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

                It's 2009. Panasonic and Samsung in 2014 have just managed to achieve Kuro 9.5G black levels but the brightness is still too low due to energy saving. Kuro is truly reference quality. Pretty much the only thing to beat it would be an OLED... but I don't want a curved screen and don't quite have £10k lying around to blow on a TV so will probably wait for it to become much cheaper.

                No double glass. The filter is bonded straight to the panel to minimise reflections. I don't, and probably won't ever have kids (meh... maybe in 10 years), so that's not a problem for me.
                Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • audiofreak19
                  Badcaps Veteran
                  • Apr 2013
                  • 556
                  • usa

                  #9
                  Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

                  Very true. Nice tv. I will have to keep my eye out for one.

                  Comment

                  • audiofreak19
                    Badcaps Veteran
                    • Apr 2013
                    • 556
                    • usa

                    #10
                    Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

                    Hey quick question while your here. Can u check out my thread about my westinghouse end of line resistor thread. Is it ok for the tv to turn on as soon as it's pluged into the wall outlet

                    Comment

                    • tom66
                      EVs Rule
                      • Apr 2011
                      • 32560
                      • UK

                      #11
                      Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

                      Budm is doing a good job, I will chime in if I have anything extra to add. It can be confusing for two to try helping at the same time.
                      Last edited by tom66; 06-01-2014, 05:56 AM.
                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                      Comment

                      • audiofreak19
                        Badcaps Veteran
                        • Apr 2013
                        • 556
                        • usa

                        #12
                        Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

                        That's true. Thanks.

                        Comment

                        • tom66
                          EVs Rule
                          • Apr 2011
                          • 32560
                          • UK

                          #13
                          Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

                          Anyway, I am picking it up Wednesday, so I will report back then.
                          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                          Comment

                          • audiofreak19
                            Badcaps Veteran
                            • Apr 2013
                            • 556
                            • usa

                            #14
                            Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

                            How much is that converted to usd

                            Comment

                            • tom66
                              EVs Rule
                              • Apr 2011
                              • 32560
                              • UK

                              #15
                              Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

                              Nearly $400 USD. Used, they are worth about 4x as much. That is about my ratio for how much I pay for a TV (including parts) vs what I sell one for. But sometimes I keep them... like this one.
                              Last edited by tom66; 06-01-2014, 06:20 AM.
                              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                              Comment

                              • audiofreak19
                                Badcaps Veteran
                                • Apr 2013
                                • 556
                                • usa

                                #16
                                Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

                                Wow I have never spent that much. Most I have spent so far was 150 and 50 in parts and learned a lesson from it about how to tell if a led panel is bad lol.

                                Comment

                                • tom66
                                  EVs Rule
                                  • Apr 2011
                                  • 32560
                                  • UK

                                  #17
                                  Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

                                  I can see this one powered up though, so there is less risk in getting a dud panel.
                                  Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                  For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                  Comment

                                  • Shinju
                                    Badcaps Legend
                                    • Mar 2014
                                    • 1239
                                    • USA

                                    #18
                                    Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

                                    Nice! Cannot wait to see your fix on this machine!

                                    What do you think of the older Pro-1110HD ?

                                    Comment

                                    • tom66
                                      EVs Rule
                                      • Apr 2011
                                      • 32560
                                      • UK

                                      #19
                                      Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

                                      It's ancient, 2004, no better than e.g. a Panasonic 50PX600U. Decently made, and a good picture, but nothing at all comparable to a Kuro. Black level will be LCD-like but it will still benefit from plasma panel technology (very bright whites, good contrast between pixels and white to black, high motion responsiveness, good colour gamut.)
                                      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
                                      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                                      Comment

                                      • Shinju
                                        Badcaps Legend
                                        • Mar 2014
                                        • 1239
                                        • USA

                                        #20
                                        Re: Pioneer Kuro PDP-LX5090 7 blinks intermittent

                                        I know that was their flagship 15k price tag set in 2004, someone offered me one for nothing it doesn't turn on. I think I will pass.

                                        I been looking for a cheap Kuro for awhile now heh, I have seen a few local but they go very quick.

                                        Comment

                                        Related Topics

                                        Collapse

                                        • pixelcap
                                          Pioneer Kuro Pro 111FD 8 red blink error
                                          by pixelcap
                                          Pioneer Kuro Pro 111FD 8 blink red LED.





                                          I have been trying to solve the power-down 8-blink red LED problem with my Pioneer.


                                          So far I have replaced the power supply board, and the digital assembly board, I have reconnected the ribbons to all boards, ensuring the connections are good. Even though the problem is the 8 red light error and not the more common 8 blue light error code, I had Kcrownie,
                                          based in North Carolina replace the chips that cause the 8 blue LED problem (the main board and audio board) the plasma is still powering...
                                          10-06-2024, 11:26 PM
                                        • GoodCapDude
                                          Sony XBR-75X940E intermittent 6 blinks error code
                                          by GoodCapDude
                                          Hi everyone. First post on Badcaps!

                                          I am trying to fix a Sony 940E from 2017 that either starts normally (and works perfectly until turned off) or goes straight to the 6 blinks error code without showing anything on the screen. It is frustrating to know that it can still work perfectly but is barely usable because of the difficulty starting it up. I am willing to try to short the BL_ERR but I would like to avoid that if possible. Does anyone have a view on this? Thanks a lot....
                                          09-20-2025, 06:07 AM
                                        • Biruslapio
                                          Panasonic P58V11B 8 and 12 blinks error "fix"
                                          by Biruslapio
                                          Bought this TV used not working, panel flashed briefly on power up and it was blinking 8 times, a quick look on SS board revealed a common fault on the 3uF 250V capacitors, C201 to C205 (C1620X in the service manual), the solder joints were all cracked, C201 and C205 pins were darkened and some sparking had occurred on them, C201 was split open and clearly overheated in its last hours, replaced that one and resoldered the others, 8 blinks fixed.

                                          Also the previous owner broke the antenna connector by taking the TV out of the wall mount forgetting to unplug it, I desoldered the tuner...
                                          04-13-2021, 07:13 AM
                                        • Nairolf
                                          Samsung DM32D – Red LED blinks 5 times, won’t start (possible mainboard issue)
                                          by Nairolf
                                          Hello,

                                          I have a Samsung DM32D display.
                                          When I try to power it on, the red LED blinks 5 times and nothing happens—the unit won’t start.

                                          Here’s what I have tried so far:
                                          1. Disconnected the cable between the mainboard and the power supply → the backlight turns on.
                                          2. Disconnected the main T-CON ribbon cable → same issue as before, the LED still blinks 5 times.
                                          3. Disconnected one of the two T-CON ribbons to the panel (tested each one separately) → same issue, the LED blinks 5 times.

                                          From these tests, I suspect the problem might be on the mainboard. Could anyone...
                                          08-24-2025, 03:47 AM
                                        • protocold
                                          MacBook Pro 15" 2010 820-2850 intermittent charging
                                          by protocold
                                          I would like to get some help on a 820-2850 logic board with intermittent charging problem. Sometimes the battery will charge all the way and sometimes magsafe would be cycling between green and orange.

                                          I have already tried replacing dc-in board, swapping good battery, swapping genuine 85w chargers. None of that helps..

                                          when it is not intermittent:
                                          PPVBAT_G3H_CHGR_R is 12.07v

                                          when it is intermittent:
                                          When the light is green, PPVBAT_G3H_CHGR_R is 12.99v
                                          when the light is orange, PPVBAT_G3H_CHGR_R is 11.62v

                                          data line on the battery...
                                          07-25-2025, 08:18 PM
                                        • Loading...
                                        • No more items.
                                        Working...