TV Felix FXV-4221 - firmware needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • gkoukoul
    Member
    • Mar 2017
    • 19
    • Greece

    #1

    TV Felix FXV-4221 - firmware needed

    Hello!

    I have a Felix TV that turns on, shows the "FELIX" logo then shows a "WISDOM SHARE" message and doesn't do or respond to anything else.
    I'm assuming a firmware flash will fix it.
    I can't find the firmware file though, anyone has it please?
  • gkoukoul
    Member
    • Mar 2017
    • 19
    • Greece

    #2
    I found the board number if it helps: TP.SK506S.PB802

    Comment

    Related Topics

    Collapse

    • EduCabral
      [Help Needed] Yatour YT-M06 (Pioneer 1) – Firmware or Schematic Request
      by EduCabral
      Hi everyone,

      I'm currently working on reviving a Yatour YT-M06 CD Changer Emulator module for use with a Pioneer 1 interface (specifically with a DEH-P5950IB head unit).

      While the unit is recognized as a CD changer, none of the USB, SD, or AUX features respond, which leads me to believe the firmware may be corrupted or incompatible.

      🔧 Details:
      • Model: YT-M06
      • Interface: Pioneer 1
      • MCU: Fujitsu MB89F202
      • Goal: Find a valid .bin firmware file or memory dump from a working unit

      I'm happy to attempt flashing, analyzing memory dumps, or doing hardware-level...
      07-15-2025, 12:26 AM
    • neo2010
      Lenovo X1 Carbon Gen 2 Touchscreen Firmware needed
      by neo2010
      Hello,

      I accidentally flashed the wrong firmware to my Lenovo Laptop Touchscreen. Now it is not recognized anymore in Windows 10. With Linux, I get the Device Listed as ELAN 04f3:000b USB device. I have modified the original Lenovo Flash Tool and tried other Firmware bin files but without success.
      The screen is the WHQD version. Can anyone provide a firmware bin file to reflash the touchscreen controller? As it seems that the controller is in recovery mode.

      Thanks in advance
      05-23-2024, 08:04 AM
    • Sam Scarbo
      Blomberg DV17600W laundry dryer MCU firmware needed. Please help!
      by Sam Scarbo
      Hello,
      I'm helping my brother to fix his Blomberg laundry dryer. He called a repair guy to have a look and the repair guy said the control board is faulty. They said the replacement board costs $400. Too expensive! 😨 My brother asks me to take a look. He has checked the door switch and thermal fuse, etc., and those seems fine.
      After plugged to mains, there is no display. There is just a clicking sound from the buzzer, like one click per second. No other response.
      I suspect the firmware inside the MCU (ATMEGA64A) got corrupted. Can someone in this forum by any chance provide...
      07-21-2024, 05:24 PM
    • EduCabral
      Help with Yatour YT-M06 Pioneer Interface (firmware or schematic needed)
      by EduCabral
      Hi everyone,

      I'm currently working on repairing a Yatour YT-M06 multimedia interface (used with Pioneer head units). I'm looking for the firmware or schematic diagram to troubleshoot the board, as it's currently unresponsive.

      If anyone has any documentation, tips, or experience with this specific unit, I'd appreciate any help!

      Thanks in advance,
      Eduardo (from Brazil)
      07-09-2025, 11:57 PM
    • ElMaDragon
      Acer Aspire A715-42G EC Firmware needed
      by ElMaDragon
      Model: Acer Aspire 7 A715-42G
      Board: GH5VZ LA-K831P(Manufacturer:ChuanYi)
      Specs: CPU:Ryzen5 5500U
      GPU:GTX1650 Laptop 4G RAM
      RAM: DDR4 8GB 3200Mhz(for testing)
      Strage:M.2 NVME 500GB(for testing)

      Hi everyone,
      I would greatly appreciate it if someone could provide a dump of the EC (KB9022Q D) for this laptop.

      I recently purchased this laptop in a non-working condition. After checking for short circuits and verifying that all voltages are present and within expected ranges, I concluded that the power-on sequence is not progressing and the...
      06-25-2025, 05:56 AM
    • Loading...
    • No more items.
    Working...