Hello,

I have an LG 49LK5700PUA (US model) running firmware 05.50.70.

I have access to the service menu (EzAdjust) using ColorControl.

Current settings:

* Model: 49LK5700PUA
* Firmware: 05.50.70
* Area Option: 22282
* Continent Index: 10
* Language & Country: US
* HW Settings: US

I am trying to convert this TV to the Brazilian (or South American) configuration equivalent to the 49LK5700PSC/PSA.

Does anyone know the correct Area Option code for this hardware platform?

I am...

ALL LCD LED TV SERVICE MENU CODES

Service Menu Code with Board Name

China Universal Board / Jumper Board Service Menu Code
Changhong Ruba Service Menu Code
Ecostar LED TV Service Menu Code
Orient LED TV Service Menu Code
Haier LED TV Service Menu Code
TCL LED TV Service Menu Code
Samsung LED TV Service Menu Code
LG LED TV Service Menu Code
Videocon LED TV Service Menu Code
Supra LED TV Service Menu Code
Toshiba LED TV Service Menu Code
Symphony LED TV Service Menu Code
Veste/ LED TV Service Menu Code...

Hi, I am locked out of the BIOS on an Acer Nitro AN16-51 (was a demo unit) and would greatly appreciate any help in getting the Unlock Code to get back in. Following a BIOS update to fix a Secure Boot warning caused by the CVE patch and a restore to Factory Keys, the laptop booted into a "Secure Boot Failure" error. While attempting to disable Secure Boot to bypass this error, I was locked out of the BIOS by an unknown Supervisor password. I got to the point where code.txt was generated, and I am being prompted to enter the Unlock Code. Thanks.

Laptop Model: Acer Nitro...

Hi all,
I'm trying to enable CVBS on the YPbPr input of a Philips 49PUS7502/12 (chassis TPM171E_R, SW TPM171E_R.107.001.143.000). This variant has no SCART and no dedicated CVBS jack — only YPbPr.

My Motivation: Displaying a 1983 Commodore 64 in full color the way it looked on a period Philips TV, without extra hardware and with minimal latency (I know some latency is unavoidable either way).

From the TPM17.1E LA service manual schematic (block 8-6-22, page 93/107 — https://www.manualslib.com/manual/23...page=93#manual), the Y signal...

I'm using Xiaomi Router 4A gigabit edition as wireless repeater. It worked fine for 2 years or so, but last week, wireless started to disappear.

When I unplug/replug the power, it was working fine for a day/half a day or so until it freezes again.

After testing with different power supply adapters and concluding it wasn't the issue I finally opened the case and this was the situation:



Anyway I proceed to clean up the mess and replace all caps but unfortunately it made the situation worse. Now router can't even boot, either it freezes during...