LG 50PT350 Help

[Bobabrett]

Re: LG 50PT350 Help

I'm an electronics noob, so even if I was able to measure, I would doubt my own accuracy. What are the chances or what would be the signs that it was the Y-board?

best,

Brett

[mmartell]

Re: LG 50PT350 Help

A faulty Y board would certainly make the pic go out but to have it come back on again... I can't tell you to replace the Y board as with the information you've provided that's just a crap shoot.

[Bobabrett]

Re: LG 50PT350 Help

Just in case any of you were following along at home---I replaced the Y Control board and everything works like clockwork!

[Gibson1986]

Re: LG 50PT350 Help

Help.. I'm also having a similar problem with my plasma I get power but no picture or sound I turn unit on and get slightly a grey glow was recommended to replace YSUS and Y buffer boards but didn't help any. I've done the wire in EXT_AUTO_GEN and hole next to it and it goes thru the color cycle any ideas?