LG 42PJ550 Click

[anotherdude]

Re: LG 42PJ550 Click

The letters after the normal product code sometimes relate to the country so that might be Norway for example. It might affect Freeview but from what I remember that can be changed in the user menu.

thanks tom, didn't fancy breaking something

as generally on here if you say it's no good or not to try the majority listen so thats good enough for me

[anotherdude]

Re: LG 42PJ550 Click

why are some ebay sellers so incompetent?

wasted 3 days waiting on a part for it to be out of stock, annoying

this will be fine as a alternative yes?

http://www.ebay.co.uk/itm/350972139933

[stj]

Re: LG 42PJ550 Click

no nand/flash device means it's looking for a usb-stick with the firmware file on it.

[anotherdude]

Re: LG 42PJ550 Click

no nand/flash device means it's looking for a usb-stick with the firmware file on it.

I get no usb activity at all when powering up

but what would the file have to be named?

[stj]

Re: LG 42PJ550 Click

no idea - usually whatever it's named when you get it in the zip file.

if you get no usb activity, is the usb port powered?
if not then maybe your missing some of the switched 5v.

[anotherdude]

Re: LG 42PJ550 Click

no idea - usually whatever it's named when you get it in the zip file.

if you get no usb activity, is the usb port powered?
if not then maybe your missing some of the switched 5v.

from what I can tell all appear fine just the mainboard is at fault, I can't find any info at all about the message in teraterm looked on lghack and a few others

from what I can tell if the mainboard is at fault the usb port will never get power but I guess i'll find out tomorrow as the mainboard has been sent out today

also looking through lghack and others recovering a bricked board isn't done by usb but from inside the linux system on the board via teraterm

[stj]

Re: LG 42PJ550 Click

internal comport?

[anotherdude]

Re: LG 42PJ550 Click

internal comport?

rs232, tried with a standard cable and with a modded 3 wire cable same results out of both

[anotherdude]

Re: LG 42PJ550 Click

just to finally clear this one up

new board arrived this morning just fitted and working fine once again, have gone for a firmware update to hopefully prevent any future problems

[sordids999]

Re: LG 42PJ550 Click

Hi can anyone point me into the right direction to test patterns or maybe jump the main board i have also the fault of clicking

Legend pins on Psu are as follows

17V 17V
GND GND
5.1V 5.1V
ERR_DET 5.1V
GND GND
GND GND
STBY STBY
AC_DET RL_ON
AUTO_GND M_ON


thanks pictures uploaded

UPDATE: sorry wrong area mines a 50PJ550