Hello!
I recently got a Sylvania 26" LCD panel for cheap as it did not turn on.
I pulled the back off and noticed the 125v 4a fuse was toasted, so I put another fuse (5a I had for a 12v car stereo) in and plugged in the panel and tried to turn it on and no luck. The new fuse did not blow but the panel did nothing no turn on or red power light ect.
The 2 1000uf caps look to the eye good but I am going to replace them anyway as well as the 2200uf cap behind the transformer cased in yellow.
What would cause the fuse to blow in the first place, bad caps or a series of other failed components?
Here are the photos of the entire spread of the panel, not much to it so this is all that was able to be photographed.
Thanks in advance! I am getting a new DMM today as my old one is failing on me.
-j
I recently got a Sylvania 26" LCD panel for cheap as it did not turn on.
I pulled the back off and noticed the 125v 4a fuse was toasted, so I put another fuse (5a I had for a 12v car stereo) in and plugged in the panel and tried to turn it on and no luck. The new fuse did not blow but the panel did nothing no turn on or red power light ect.
The 2 1000uf caps look to the eye good but I am going to replace them anyway as well as the 2200uf cap behind the transformer cased in yellow.
What would cause the fuse to blow in the first place, bad caps or a series of other failed components?
Here are the photos of the entire spread of the panel, not much to it so this is all that was able to be photographed.
Thanks in advance! I am getting a new DMM today as my old one is failing on me.
-j
.
Comment