I have a Panasonic Lumix GH5 that I replaced the screen panel on. Attached is a photo of the new screen bought off Ebay and sent from China. First is with the lens off and camera cap on, and the second is with the lens on. The problem is there are vertical bands on the sides, fuzzy electric noise, and the image flickers. The camera also has a EVF, and the image there is tack sharp.
Seller says it is most likely a circuit on the Main Board, but my experience is this type of issue is usually a cable or bad display. I have cleaned all the cables and inserted them under my scope. They are done correctly. Do cables wear out from inserting them and removing? Anything I can look for? I don't see any issues.
I cannot open up the rew panel or I cannot send it back.
Thoughts?
Seller says it is most likely a circuit on the Main Board, but my experience is this type of issue is usually a cable or bad display. I have cleaned all the cables and inserted them under my scope. They are done correctly. Do cables wear out from inserting them and removing? Anything I can look for? I don't see any issues.
I cannot open up the rew panel or I cannot send it back.
Thoughts?