Sony 55W905 dead

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Talyn
    New Member
    • Apr 2024
    • 1
    • Germany
    #1

    Sony 55W905 dead

    Hi,
    My Sony W905 started to turn itself off an on every few minutes and blinking 8 times red in standby. A few minutes later the tv was completely dead.
    I can only hear the click of the PSU when attaching/detaching the power cable. No standby LED.

    Any advice? Thanks!
    Tags: None
    • Diah
      Badcaps Legend
      • Feb 2013
      • 6343
      • Germany
      #2
      sony W series are known with BGA issue under the Soc.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • tvguy12012012120
          Zombie Samsung UN55NU6900F dead / no standby voltage - randomly came to life after hours of troubleshooting then died
          by tvguy12012012120
          This is my first attempt at troubleshooting a board like this, I know I could just buy a new board but I'm curious to figure out how this works. I've been testing different components in the evenings this week and I think the problem is with the IC failing to start up for some reason. When the board is plugged in there is no standby voltage.

          Then today it randomly sprung to life like a zombie but shortly died thereafter. I have no idea why it would have done that and its the first time I've seen it running. I discharged capacitors on the board last night, then it was sitting today....
          02-07-2025, 05:13 PM
        • piposarcade
          Samsung UN50KU6300 dead no standby led
          by piposarcade
          Samsung UN50KU6300 dead no standby led

          01-04-2024, 01:33 PM
          Greetings to all, a while ago my TV was dead, it didn't turn on and the standby light was off, the next day it is working. But these days it no longer wants to turn on, I did some troubleshooting, I disconnected the main board, I checked the voltage on the backlight and there is 400 DC, when I connect it again the main board the voltage drops, in all that troubleshooting, miraculously the standby light comes on and the TV works. After an hour I check and test, I turn on the TV, the Stanby light flashes 3 times and it...
          05-22-2024, 02:07 PM
        • fharris1977
          Vizio D50u-D1 Dead Set No Standby
          by fharris1977
          Hi. I got a Vizio with no power or standby, and won't turn on with remote or button. I checked the voltages on the connector and all read 0.00V or nearly 0(0.050 ON/OFF pin). None of the pins are labeled STB for standby although I do see some 5V pins. Other than the obvious standby led, which isn't coming on, is there a way to check for standby voltage on this PS. I'm trying to see if my problem is the PS or mainboard. Some Vizios I have fixed with no standby led me to think it was the PS but it turned out being the mainboard. Any experience with this set would be greatly appreciated.
          1 Photo
          12-28-2023, 10:25 AM
        • rabbituk
          Sony HCD BX7700dbi CMT flashing standby
          by rabbituk
          I have got a Sony HCD-BX7700dbi that isn't worth a lot but I'm keen to learn how to repair and would appreciate some help with my train of thought. The protection circuit is kicking in and the standby light is blinking. It goes into protection mode within a second of powering it on.

          So far the relay on the power board that enables the main transformer clicks on and then off when powering on the unit. Looking at the schematics, the permanently enabled power rail called 'unreg sub' provides about 13.5VDC. Where the power comes into the main board on connector CN303, there is a diode...
          02-11-2025, 05:05 PM
        • jacobtc
          LG C1 65'' dead standby
          by jacobtc
          I've owned this C1 from new since late 2021, and it has now suddenly started with the following symptom:
          If power has been connected for a while, the red standby lamp turns off, and the tv wont turn on (no reaction from remote or button on tv).
          If power has been disconnected for 5 minutes, the tv turns on fine, until turned off and left for a couple minutes, as the standby light will then turn off again.

          I've seached and found that this is most likely a failing PSU, and I've seen repair services on eBay fixing these symptoms, so I am hoping that someone here has fixed...
          01-29-2025, 04:27 AM
        • Loading...
        • No more items.
        Working...