Red light but no power - alba tv please help

[SmartestSmarty]

Re: Red light but no power - alba tv please help

Plug Black lead in COM,Red lead in VmA above it, Set meter to V-20 to the left of off,Black probe to any fixing screw on power board, Red probe on wire connector next to caps start with top red wire and work down, and let us know what the meter reads Flocko

Hi thanks for your reply.

All except the last two read between 0.01-0.02 for about a second and then went to 0.00.

The last two read 0.00.

The red power light is lit, I don't know if that helps?

Any suggestions whats wrong, or what to do next?

[flocko]

Re: Red light but no power - alba tv please help

Plug Black lead in COM,Red lead in VmA above it, Set meter to V-20 to the left of off,Black probe to any fixing screw on power board, Red probe on wire connector next to caps start with top red wire and work down, and let us know what the meter reads Flocko

[SmartestSmarty]

Re: Red light but no power - alba tv please help

You would need a digital multimeter, do you have one or could you borrow one? A relatively inexpensive bit of kit; Maplin sell them for under £10 each.

post a picture up of your multimeter then we will advise what setting to have it on and how to test etc.

Thanks.

[vinceroger69]

Re: Red light but no power - alba tv please help

post a picture up of your multimeter then we will advise what setting to have it on and how to test etc.

[SmartestSmarty]

Re: Red light but no power - alba tv please help

Thanks for your reply.

How would I test it? what settings would I use?

[Alastair E]

Re: Red light but no power - alba tv please help

Prolly find its the mainboard thats at fault. Confirm there's 12v coming from that PSU first...

The pins on the PSU are marked what they are...

[SmartestSmarty]

Re: Red light but no power - alba tv please help

Here's some images:

[SmartestSmarty]

Re: Red light but no power - alba tv please help

The model number is: ATVD91216B

[SmartestSmarty]

Re: Red light but no power - alba tv please help

Perhaps update your profile with country and voltage so we know what voltages we are dealing with.

I'm not sure what the line voltage would be for United Kingdom?

[selldoor]

Re: Red light but no power - alba tv please help

Perhaps update your profile with country and voltage so we know what voltages we are dealing with.

[tom66]

Re: Red light but no power - alba tv please help

Post a picture first, then we can guide you through.

[SmartestSmarty]

Re: Red light but no power - alba tv please help

I have one.

But never used it to test a board.

Any advice?

[tom66]

Re: Red light but no power - alba tv please help

You would need a digital multimeter, do you have one or could you borrow one? A relatively inexpensive bit of kit; Maplin sell them for under £10 each.

[SmartestSmarty]

Re: Red light but no power - alba tv please help

Hi thanks for your reply.

How would I test it.

I literally can't see what else could be wrong with it.
Any suggestions what could be the problem and the solution?

[tom66]

Re: Red light but no power - alba tv please help

Just looks like factory markings, nothing wrong with that - also looks like that power board outputs one voltage only which is always available so you can check to see if that is testing OK.

[SmartestSmarty]

Re: Red light but no power - alba tv please help

Model #? Pictures of the boards and of the suspect capacitors?

Hello I am not with the TV right now, but I will definitely update this thread with the model number as soon as I can.

I have attached an image so you can see the suspect cap.

[tom66]

Re: Red light but no power - alba tv please help

Model #? Pictures of the boards and of the suspect capacitors?

[SmartestSmarty]

Dear all,

I have an alba tv, and it will not turn on.

The red standby light is solid, but when I click the power button on the remote or the set; It will not do anything at all.

I have opened it up and can see two capacitors have a reddish dust on them. Do these need changing?