panasonic tx 50ax802b

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vinceroger69
    Badcaps Legend
    • Mar 2012
    • 6714
    • uk

    #1

    panasonic tx 50ax802b

    Hi guys just been given this set, issue i have when it powers up it just stays on the panasonic splash/boot screen i have left it on for 10 minutes just stays on this screen would i be rite thinking firmware?
    mainboard tnph1100 2 a
    screen vs500dk1-ks2
  • Diah
    Badcaps Legend
    • Feb 2013
    • 6437
    • Germany

    #2
    HW --- short lifespan of eMMCr. .. complete MB exchange or re program new eMMC

    Comment

    • vinceroger69
      Badcaps Legend
      • Mar 2012
      • 6714
      • uk

      #3
      Originally posted by Diah
      HW --- short lifespan of eMMCr. .. complete MB exchange or re program new eMMC
      Just been reading through a few forums it looks like its a emmc bga issue there are a few sites on ebay offering reball etc its aroud £115.00 so not really cost effective on a older set
      https://www.ebay.co.uk/itm/333916033...3Avlp_homepage
      Last edited by vinceroger69; 01-08-2024, 01:50 PM.

      Comment

      • Diah
        Badcaps Legend
        • Feb 2013
        • 6437
        • Germany

        #4
        if you believe its BGA.... then cooking it LOL

        Comment

        • vinceroger69
          Badcaps Legend
          • Mar 2012
          • 6714
          • uk

          #5
          https://www.badcaps.net/forum/troubl...panasonic-logo

          Comment

          • vinceroger69
            Badcaps Legend
            • Mar 2012
            • 6714
            • uk

            #6
            Originally posted by Diah
            if you believe its BGA.... then cooking it LOL
            the thread i have linked above is worth a read

            Comment

            • Diah
              Badcaps Legend
              • Feb 2013
              • 6437
              • Germany

              #7
              freeze on logo or at any part of start up script never being BGA.... if there are boot loop then we consider BGA first after firmware ftrying
              Last edited by Diah; 01-08-2024, 02:09 PM.

              Comment

              • vinceroger69
                Badcaps Legend
                • Mar 2012
                • 6714
                • uk

                #8
                Originally posted by Diah
                freeze on logo or at any part of start up script never being BGA.... if there are boot loop then we consider BGA first after firmware ftrying
                Thanks diah reading the thread yes looks like its a bga mounted emmc but no firmware online available to download so guess the ebay shops are the only option but doubt if re sale value would be worth the outlay of £115.00

                Comment

                • Diah
                  Badcaps Legend
                  • Feb 2013
                  • 6437
                  • Germany

                  #9
                  if it were 55 size then worth to change the brand totally.. but its 50 hard to find... you know better how to deal with vestel

                  Comment

                  Related Topics

                  Collapse

                  • frannyjunk
                    Hisense 40H4F no backlight but turns off after splash screen
                    by frannyjunk
                    So I have this Hisense tv where the backlight does not come on. But when it is turned on, when I shine a flashlight on the screen, I can clearly see the splash screen then it turns off. I looked at the mainboard and was expecting to see bulged capacitors, but they all look fine. I unplugged the backlight from the mainboard, and get the same symptoms (i.e. no backlight, dark splash screen then just a black screen). Is this just a backlight issues? Do Hisense tvs turn off by itself if the backlights are unplugged or are bad? Or is this a mainboard issue?

                    TIA.
                    09-24-2025, 10:59 AM
                  • JunkmanJimbo
                    Samsung UN55J6200AFXZA Splash Screen Comes up, goes out, screen flashes one time and won't turn off
                    by JunkmanJimbo
                    Samsung UN55J6200AFXZA Splash Screen Comes up, goes out, screen flashes one time and then tv won't turn off.
                    No picture. No sound that I can tell. Backlights are on and have been checked. Flashlight test no image on screen. I replaced the Eprom chip hoping that was the problem but nothing changed.
                    Please help. Thanks in advance!
                    08-12-2025, 11:45 AM
                  • Ryan.man
                    Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                    by Ryan.man
                    Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                    My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                    This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                    02-04-2025, 12:23 PM
                  • Chrissygizmo
                    Panasonic TX-48CX350B backlights but white screen , blank screen
                    by Chrissygizmo
                    Hi all, I’ve got a problem I hope someone can help me fixi.
                    I have a Panasonic TX-48CX350B tv , it powers up ok but the screen is blank, the backlights are working, there’s nothing else though, no picture or sound. I’m not sure what the fault is called whether it’s BLANK/ BLACK/ or WHITE SCREEN I’ve actually came across this before on a similar tv but just ended up scrapping it, I will upload pictures of the boards etc , if anyone could help me I would really appreciate it...
                    01-11-2025, 03:18 PM
                  • Alicat
                    Panasonic Plasma TH-50PZ85U No screen No blinks on red power light
                    by Alicat
                    Hello,

                    Stopped by this site trying to fix my parents Panasonic Plasma TV.

                    Model number is TH-50PZ85U

                    Power comes on and the red power light stays on solid.

                    Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.

                    I also hear a few clicks.

                    I also think my parents said there was a thunderstorm and the TV failed after that.

                    Section 6 in the service manual talks about power and no screen,...
                    10-30-2024, 10:09 AM
                  • Loading...
                  • No more items.
                  Working...