panasonic tx 50ax802b

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vinceroger69
    Badcaps Legend
    • Mar 2012
    • 6714
    • uk

    #1

    panasonic tx 50ax802b

    Hi guys just been given this set, issue i have when it powers up it just stays on the panasonic splash/boot screen i have left it on for 10 minutes just stays on this screen would i be rite thinking firmware?
    mainboard tnph1100 2 a
    screen vs500dk1-ks2
  • Diah
    Badcaps Legend
    • Feb 2013
    • 6355
    • Germany

    #2
    HW --- short lifespan of eMMCr. .. complete MB exchange or re program new eMMC

    Comment

    • vinceroger69
      Badcaps Legend
      • Mar 2012
      • 6714
      • uk

      #3
      Originally posted by Diah
      HW --- short lifespan of eMMCr. .. complete MB exchange or re program new eMMC
      Just been reading through a few forums it looks like its a emmc bga issue there are a few sites on ebay offering reball etc its aroud £115.00 so not really cost effective on a older set
      https://www.ebay.co.uk/itm/333916033...3Avlp_homepage
      Last edited by vinceroger69; 01-08-2024, 01:50 PM.

      Comment

      • Diah
        Badcaps Legend
        • Feb 2013
        • 6355
        • Germany

        #4
        if you believe its BGA.... then cooking it LOL

        Comment

        • vinceroger69
          Badcaps Legend
          • Mar 2012
          • 6714
          • uk

          #5
          https://www.badcaps.net/forum/troubl...panasonic-logo

          Comment

          • vinceroger69
            Badcaps Legend
            • Mar 2012
            • 6714
            • uk

            #6
            Originally posted by Diah
            if you believe its BGA.... then cooking it LOL
            the thread i have linked above is worth a read

            Comment

            • Diah
              Badcaps Legend
              • Feb 2013
              • 6355
              • Germany

              #7
              freeze on logo or at any part of start up script never being BGA.... if there are boot loop then we consider BGA first after firmware ftrying
              Last edited by Diah; 01-08-2024, 02:09 PM.

              Comment

              • vinceroger69
                Badcaps Legend
                • Mar 2012
                • 6714
                • uk

                #8
                Originally posted by Diah
                freeze on logo or at any part of start up script never being BGA.... if there are boot loop then we consider BGA first after firmware ftrying
                Thanks diah reading the thread yes looks like its a bga mounted emmc but no firmware online available to download so guess the ebay shops are the only option but doubt if re sale value would be worth the outlay of £115.00

                Comment

                • Diah
                  Badcaps Legend
                  • Feb 2013
                  • 6355
                  • Germany

                  #9
                  if it were 55 size then worth to change the brand totally.. but its 50 hard to find... you know better how to deal with vestel

                  Comment

                  Related Topics

                  Collapse

                  • Ryan.man
                    Macbook 2017 with touchbar (A1706) won't turn on after removing the screen
                    by Ryan.man
                    Hello everybody! Posting this in hopes somebody has some expertise that leads to a clear path of troubleshooting that saves me a lot of time!

                    My macbook has the flex cable problem, the one that prevents the screen turning on. Ive been dealing with this for the last 3 years. Last year it went dead and I managed to fix it following youtube tutorials. But my fix wasnt the best, the problem returned a month later. This week, it went dead again. I again tried to fix it.

                    This time the original cable broke too close to the screen, it can't be fixed without tearing the screen...
                    02-04-2025, 12:23 PM
                  • Chrissygizmo
                    Panasonic TX-48CX350B backlights but white screen , blank screen
                    by Chrissygizmo
                    Hi all, I’ve got a problem I hope someone can help me fixi.
                    I have a Panasonic TX-48CX350B tv , it powers up ok but the screen is blank, the backlights are working, there’s nothing else though, no picture or sound. I’m not sure what the fault is called whether it’s BLANK/ BLACK/ or WHITE SCREEN I’ve actually came across this before on a similar tv but just ended up scrapping it, I will upload pictures of the boards etc , if anyone could help me I would really appreciate it...
                    01-11-2025, 03:18 PM
                  • Alicat
                    Panasonic Plasma TH-50PZ85U No screen No blinks on red power light
                    by Alicat
                    Hello,

                    Stopped by this site trying to fix my parents Panasonic Plasma TV.

                    Model number is TH-50PZ85U

                    Power comes on and the red power light stays on solid.

                    Did a few checks like hold the power button on for 60 seconds, hold the - Volume while holding the menu button, no luck, still@ blank grey screen as the screen lights up very vague.

                    I also hear a few clicks.

                    I also think my parents said there was a thunderstorm and the TV failed after that.

                    Section 6 in the service manual talks about power and no screen,...
                    10-30-2024, 10:09 AM
                  • Scruit
                    Does the Oak OTI067 have a splash screen / initialization message at bootup?
                    by Scruit
                    tl;dr ... Question: Does the Oak OTI067 have a splash screen / initialization message at bootup?

                    More detail:

                    Working on "Uncle Sherman", my Mitsubishi MP-3200 386 from 1988. Before I start up old computers I have a process where I disassemble, test for shorts, visually inspect, capture EPROM images etc.

                    My T866II+ give me a "pins not detected" error on the EPROM from the Oak-based (OTI067 GPU but apparently a no-name card??) I assumed the EPROM was bad, ordered a replacement and figured I'd program a downloaded ROM image to it....
                    04-17-2022, 06:03 AM
                  • smic717394
                    iphone XS turns off when press on screen.
                    by smic717394
                    Hi,

                    I have a iphone XS that came in for a screen replacement, the screen was badly cracked, and inside missing scues, on the back of the screen still the blue protector, the screen was a LCD. So we replaced the screen and all good, installed the screen and we noticed that pressing the screen with a bit of force but not excessive, the phone dies. After plugging the charger it turns back on, but again if you press it it dies. I open the phone again, and I can't see anything major, with the phone open, if I press on the logic board, battery, charging board, or even putting pressure on...
                    07-25-2024, 10:16 AM
                  • Loading...
                  • No more items.
                  Working...