Philips 42FD9944 powersupply failure

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • PowerAmpFreak
    Badcaps Veteran
    • Feb 2010
    • 977
    • Sweden
    #1

    Philips 42FD9944 powersupply failure

    Hello everyone,

    Got a struggling older Philips plasma, model 42FD9944.
    During poweron it crackles and pops from the SMPS, I can read a somewhat unstable PFC voltage of around 390VDC, jumps a few volts up and down.
    VA and VS does not start anymore, recently tried to start up those, but not reach their correct magnitudes.

    Suspect a bad caps SOMEWHERE, there are hundreds in this set.

    Please check the attached pic and let me know if you know what to check.
    Attached Files
    Tags: None
    • PowerAmpFreak
      Badcaps Veteran
      • Feb 2010
      • 977
      • Sweden
      #2
      Re: Philips 42FD9944 powersupply failure

      Any advice?
      Have to go through the pcb with freeze spray. Hairdryer didn't reveal anything.

        Comment

        • freakaftr8
          Badcaps Legend
          • Oct 2012
          • 3743
          • USA
          #3
          Re: Philips 42FD9944 powersupply failure

          Crackle and popping is not a good sign, where in the SMPS is that coming from? Primary or secondary side?
          Did I leave the soldering iron on?

            Comment

            • PowerAmpFreak
              Badcaps Veteran
              • Feb 2010
              • 977
              • Sweden
              #4
              Re: Philips 42FD9944 powersupply failure

              It's hard to determine which side crackles. I suspect the crackles are, simply, the PFC trying to regulate but the DC/DC is jumpy and won't present a smooth load.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Sus256
                  HISENSE 65E7KQ PRO - no boot
                  by Sus256
                  Hi all!

                  HISENSE 65E7KQ PRO
                  RSAG7.820.13512 - chassis
                  MT9618BAATAB - cpu
                  RSAG7.820.12059 - power
                  HD650Y3U77 - panel
                  KLM8G1GETF - emmc

                  The TV does not turn on, the standby indicator is on. All voltages are present.
                  Emms is dead. Not readable, not detected.
                  Replaced emmc.
                  But with another dump there is no launch

                  Terminal log

                  UART
                  <
                  AC_ON
                  RPMB key is not yet programmed

                  HASH1_VERSION=0x00000000 64bit
                  E-B
                  FDE enabled
                  layout pattern onebin by SAR7,0...
                  06-01-2025, 02:11 AM
                • aidanmo
                  Philips 43PUS7506/12 - Loud blown out sound
                  by aidanmo
                  Hello,

                  I've got a really strange issue with the speakers on my Philips 43PUS7506/12. It makes this awful loud buzzing now. It happened after it was attempted to be wall mounted - I think the back got squeezed and something broke.
                  I thought maybe the speakers got damaged, so I replaced them - no dice.
                  • Using the internal speakers, it always happens.
                  • Using the headphone jack, it never happens.
                  • Using the digital/optical out with a soundbar - it happens after about 2h/movie runtime - it's never as drastic, it just pops in and out, but I didn't want it to damage the sound bar
                  ...
                  02-28-2025, 03:13 PM
                • ctroxtell
                  Carrier HK50AA063 display controller common failure help
                  by ctroxtell
                  I've got a control display for a Carrier chiller that I'm trying to understand what the common failure with these boards are. This is the board in question https://www.supplyhouse.com/Carrier-...arquee-Display all of them seem to develop a failure with the up and down arrow buttons on the right side of the display, the esc and enter keys I've never seen fail. Once these boards are plugged in they run 24/7, you used to have to press extremely hard with the end of the blunt screwdriver and you could still get the arrows to work but now it has completely stopped working. The button...
                  02-05-2025, 05:31 PM
                • howardc64
                  Vizio E55-F1 dark backlight zones. LED failure or Dimming Zone Driver?
                  by howardc64
                  Problem

                  Fixing a dimming zone TV with LEDs not lighting up. Dimming zone circuit introduces added variable to diagnose LED and/or Dimming Zone Driver board? Some 1/2 rows of LEDs appears to be out in active dimming zone off AND some brightness flickering with active dimming zone high while playing changing video



                  Model & Board Pics



                  Conflicting Spec

                  Vizio indicate this TV has 10 dimming zones. However, LED strips and Zoned light driver connector suggest 12

                  https://www.shopjimmy.com/vizio-gj-2k1...
                  10-10-2024, 01:16 PM
                • sam_sam_sam
                  Mitsubishi CNC switching power supply board dead / relay board bad diode failure
                  by sam_sam_sam
                  I was working on this CNC machine today found no keyboard functioning no control relay powering on
                  The screen powered on and was giving an operation error but the manual was not very clear about what the error exactly was but with a little bit of troubleshooting and finding out that the control relays not powering on and no keyboard functions we narrowed down to this one switching power supply which of course does not have any indicator LED light they are on the keyboard interface/relay controller board

                  Found shorted diodes on main controller relays there are 3 of them that...
                  01-07-2023, 05:43 PM
                • Loading...
                • No more items.
                Working...