This is one of seven TV's I got off of a guy who had a great idea of fixing busted sets then realized he did not know where to start. Only paid $30 for all of them and one had a decent wall mount, so figure I am not losing out on much. Need power cords on 2 more, 1 is a gutted 55" Samsung
, and the other 3 will get their own threads.
This TV does not power on. Do not see any obvious bad caps. Volts appear good going to the main board (all around 23-23.5 volts on line marked 24) and volts going to backlight is at 2.2volts when marked 12 volts. The set is powered on, I have a green light on the main board and the digital sound port is glowing red.
Only replacement boards I was able to find are in the UK, not sure if I want to drop 70-75 on a board when the TV ain't worth it. But if I can fix a component on the board itself... that would be great.
Thanks

This TV does not power on. Do not see any obvious bad caps. Volts appear good going to the main board (all around 23-23.5 volts on line marked 24) and volts going to backlight is at 2.2volts when marked 12 volts. The set is powered on, I have a green light on the main board and the digital sound port is glowing red.
Only replacement boards I was able to find are in the UK, not sure if I want to drop 70-75 on a board when the TV ain't worth it. But if I can fix a component on the board itself... that would be great.
Thanks
Comment